Re: IOS - running multiple commands in one line

Steve - Yes that's closer but was looking to do it on regular shell (not on
TCL shell) :(..... hard to please me isn't it?

@David - that would be good if we've luxury of having a vi editor with IOS
:)

On Wed, Mar 9, 2011 at 3:52 PM, Steve Di Bias <sdibias_at_gmail.com> wrote:

> I tried Brian's solution under tclsh using the same command you posted and
> it worked like a champ!
>
> CAT3(tcl)#
> CAT3(tcl)#show flash;ping 5.5.5.5
>
> Directory of flash:/
>
> 2 -rwx 924 Mar 1 1993 00:41:27 +00:00 vlan.dat
> 3 -rwx 9860621 Mar 1 1993 00:13:02 +00:00
> c3560-advipservicesk9-mz.122-40.SE.bin
> 4 -rwx 1048 Mar 28 1993 11:18:46 +00:00 multiple-fs
> 5 drwx 64 Mar 1 1993 00:40:48 +00:00
> c3560-ipservicesk9-mz.122-50.SE3
> 8 -rwx 24 Mar 28 1993 11:18:46 +00:00 private-config.text
> 9 -rwx 3527 Mar 28 1993 11:18:46 +00:00 config.text
>
> 32514048 bytes total (10543616 bytes free)
> Type escape sequence to abort.
> Sending 5, 100-byte ICMP Echos to 5.5.5.5, timeout is 2 seconds:
> !!!!!
> Success rate is 100 percent (5/5), round-trip min/avg/max = 1/2/8 ms
> CAT3(tcl)#
>
> On Mon, Mar 7, 2011 at 2:54 PM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:
>
>> Is there a way to do this?
>>
>> like
>>
>> router#ping 5.5.5.5 ; show flash:
>>
>> just in one line?
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>>
>>
>>
>>
>>
>>
>
>
> --
> -Steve Di Bias

Blogs and organic groups at http://www.ccie.net
Received on Wed Mar 09 2011 - 18:12:04 ART