Re: IOS - running multiple commands in one line

There's also the 'config replace' rather than 'config t'. You can do a
partial configuration I believe with this replace.

Sometimes if there are dependencies - like you have to shut down a profile
before removing it, this won't work. It should log the errors though.

Extending on the copy flash:file run, if you need the same config to
multiple routers try something like copy tftp://1.1.1.1/config.txt run

-nick

On Tue, Mar 8, 2011 at 10:53 PM, David Prall <dcp_at_dcptech.com> wrote:

> copy flash:commandfile run
>
> David
>
> --
> http://dcp.dcptech.com
>
>
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > Radioactive Frog
> > Sent: Tuesday, March 08, 2011 10:47 PM
> > To: Brian McGahan
> > Cc: Cisco certification
> > Subject: Re: IOS - running multiple commands in one line
> >
> > Thanks everyone..
> > Yes the requirement is to run 2 command at the same time....
> > like
> >
> > interface fe0/0
> > shut;noshut
> >
> > think about if you're remotely logged into a router and need to do
> > shut+noshut at the same time.
> >
> > of course Macro would do it or EEM or any cron type TCL scripting.
> >
> > The idea is to keep it as simple as possible.
> >
> >
> >
> > On Wed, Mar 9, 2011 at 1:21 PM, Brian McGahan <bmcgahan_at_ine.com> wrote:
> >
> > > You could also do this with TCL. Not all platforms and versions
> > support it
> > > though.
> > >
> > >
> > > Brian McGahan, CCIE #8593 (R&S/SP/Security)
> > > bmcgahan_at_INE.com
> > >
> > > Internetwork Expert, Inc.
> > > http://www.INE.com
> > >
> > >
> > > -----Original Message-----
> > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> > Of
> > > Jay McMickle
> > > Sent: Tuesday, March 08, 2011 7:40 PM
> > > To: Steve Di Bias
> > > Cc: Ryan West; Radioactive Frog; Cisco certification
> > > Subject: Re: IOS - running multiple commands in one line
> > >
> > > Good point, Steve. Thanks.
> > >
> > > Regards,
> > > Jay McMickle- CCNP,CCSP,CCDP
> > > Sent from my iPhone
> > > http://mycciepursuit.wordpress.com
> > >
> > >
> > > On Mar 8, 2011, at 3:03 PM, Steve Di Bias <sdibias_at_gmail.com> wrote:
> > >
> > > >
> > > > Jay is correct, if you are asked to do something in one line use a
> > macro.
> > > However, since this is a global macro you would need to modify it
> > just a
> > > little bi by adding in the "do" keyword
> > > >
> > > > macro name test
> > > > do ping 5.5.5.5
> > > > do show flash
> > > > @
> > > >
> > > > macro global apply test
> > > >
> > > >
> > > > On Tue, Mar 8, 2011 at 9:17 AM, Jay McMickle
> > <jay.mcmickle_at_yahoo.com>
> > > wrote:
> > > > Yes, it's possible with a "macro name commands" command.
> > > > Macro name test
> > > > Ping 5.5.5.5
> > > > Sh run
> > > > @
> > > > Exit
> > > >
> > > > Now execute test and it will perform the operations.
> > > >
> > > > This is actually covered in IPExperts VOD day 1 material under
> > lecture,
> > > bridging and switching. I'm sure INE has it too, but only have their
> > > workbooks.
> > > >
> > > > Regards,
> > > > Jay McMickle- CCNP,CCSP,CCDP
> > > > Sent from my iPhone
> > > > http://mycciepursuit.wordpress.com
> > > >
> > > >
> > > > On Mar 7, 2011, at 4:59 PM, Ryan West <rwest_at_zyedge.com> wrote:
> > > >
> > > > > Is this a test type question or something that you'd like to be
> > able to
> > > script. If the later, I would look at RANCID.
> > > > >
> > > > > -ryan
> > > > >
> > > > > -----Original Message-----
> > > > > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On
> > Behalf
> > > Of
> > > Radioactive Frog
> > > > > Sent: Monday, March 07, 2011 5:55 PM
> > > > > To: Cisco certification
> > > > > Subject: IOS - running multiple commands in one line
> > > > >
> > > > > Is there a way to do this?
> > > > >
> > > > > like
> > > > >
> > > > > router#ping 5.5.5.5 ; show flash:
> > > > >
> > > > > just in one line?
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > > >
> > > > >
> > > > > Blogs and organic groups at http://www.ccie.net
> > > > >
> > > > >
> > _______________________________________________________________________
> > > > > Subscription information may be found at:
> > > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > > Blogs and organic groups at http://www.ccie.net
> > > >
> > > >
> > _______________________________________________________________________
> > > > Subscription information may be found at:
> > > > http://www.groupstudy.com/list/CCIELab.html
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > --
> > > > -Steve Di Bias
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > >
> > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Mar 08 2011 - 23:03:24 ART