Re: PIM-SM (Bootstrap Protocol vs Aotu-RP

BSR uses 224.0.0.13 for BSR announcements (from BSR to all pim routers) and
unicast for RP announcements (from RP to BSR router).

--
Garry L. Baker
"There is no 'patch' for stupidity." - www.sqlsecurity.com
On Fri, Dec 10, 2010 at 12:38 PM, Mark_1982 <m.abghany_at_gmail.com> wrote:
> Hi there
> i was going through the mini senarios and found that the bootstrap protocol
> doesnt need any mechanism to probagate the election results of the RP to
> the
> rest of the multicast domain like the case of auto-RP, for auto-RP u need
> to
> use either ip pim autorp listener or use sparse dense mode, but here all u
> need is let R3 works as C-RP and C-BSR, can any one help me on this
>
> the topology is as shown below:
>
> Host1-R1-R2-R3-R4-R5-Host2
>
> u can check the topology on the following
> http://ccie18473.net/dynamips/dynamips.htm#pim-sm-bsr
>
> thanks
>
> Mark
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net