Re: Cisco 881 QoS for the switchports

Thanks David for getting back to me.

Do any one know some tricks to do QoS for the switchports ?.,

Thanks.

-----Original Message-----
From: David Prall
Sent: Tuesday, November 16, 2010 2:53 PM
To: 'Edouard Zorrilla' ; ccielab_at_groupstudy.com
Subject: RE: Cisco 881

Fast0 - 3 are all switchports. Fast4 is a routed interface where you can do
real QoS configuration. There are a number of tricks that can be done to do
QoS for the switchports, just not on them.

David

--
http://dcp.dcptech.com
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> Edouard Zorrilla
> Sent: Tuesday, November 16, 2010 5:43 PM
> To: ccielab_at_groupstudy.com
> Subject: Cisco 881
>
> Hello Guys,
>
> I have a Cisco 881 and I want to set up a bservice-policy input
> limit-httpb and bservice-policy output limit-httpb on F2 so that I
> can
> limit the bandwidth on both ways.
>
>
> Test118.108(config-if)#service-policy input http-limit
> Weighted Fair Queueing feature not supported in input policy.
> Bandwidth command not allowed at parent level in input direction
> Test118.108(config-if)#
>
> Do you know if there is a way to do that so that I can limit inbound
> and
> outbound bandwidth ?.
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net