Re: L2TPv3

No need for Internetworking type as both are same FR.

It seems to me "frame-relay DCE type" issue.

Please try to remove "no frame-relay intf-type dce" on both R2/R8 and
disable frame-relay switching.

Regards,
Anser

On Tue, Nov 2, 2010 at 11:18 AM, Prakash Kalsaria <
kalsaria.prakash_at_gmail.com> wrote:

> From My Opinon
> Interworking ip statment
> in psudowire class is missing
>
> So try this one ...
>
> pseudowire-class L2TPV3
> encapsulation l2tpv3
> interworking ip
> ip local interface Loopback0
>
> regards;
> Prakash Kalsaria
> http://prakashkalsaria.wordpress.com
>
>
> On Tue, Nov 2, 2010 at 12:38 PM, Gaurav Thukral <pearlgaurav_at_gmail.com
> >wrote:
>
> > Hi guys,
> >
> > I have the following diagram for L2TPv3
> >
> > R4---------FR--------R8-----------------R2----------FR--------R3
> >
> > R8 & R2 are PE and R4 & R3 are CE.
> >
> > I have done the following configuration on the devices.
> >
> > R8 & R2
> >
> > pseudowire-class L2TPV3
> > encapsulation l2tpv3
> > ip local interface Loopback0
> >
> > R4
> >
> > interface Serial0/0
> > ip address 5.5.34.4 255.255.255.0
> > encapsulation frame-relay IETF
> > frame-relay map ip 5.5.34.3 408 broadcast
> > frame-relay lmi-type ansi
> >
> > R3
> >
> > interface Serial0/0
> > ip address 5.5.34.3 255.255.255.0
> > encapsulation frame-relay IETF
> > frame-relay map ip 5.5.34.4 302 broadcast
> > frame-relay lmi-type ansi
> >
> > R8
> >
> > frame-relay switching
> >
> > int s0/0
> > encapsulation frame-relay IETF
> > frame-relay intf-type dce
> > frame-relay lmi-type ansi
> > frame-relay interface-dlci 804 switched
> >
> >
> > connect L2TP Serial0/0 804 l2transport
> > xconnect 5.5.2.2 28 pw-class L2TPV3
> >
> > R2
> >
> > frame-relay switching
> >
> > int s0/0
> > encapsulation frame-relay IETF
> > frame-relay intf-type dce
> > frame-relay lmi-type ansi
> > frame-relay interface-dlci 203 switched
> >
> > connect L2TP Serial0/0 203 l2transport
> > xconnect 5.5.8.8 28 pw-class L2TPV3
> >
> > The L2tpv3 is not comming Up &
> >
> > in sh ip int brief on the routes it is showing line protocol down.
> >
> > Please tell me where i have done the configuration mistake?
> >
> > Regards,
> > Gaurav
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Nov 02 2010 - 11:25:11 ART