Re: L2TPv3

Yes it cames up .

after Removing the both commands on R2/R8.

Thanks a Ton Mohammad

Regards,
Gaurav

On Tue, Nov 2, 2010 at 1:55 PM, Muhammad Anser Khan <manserkhan_at_gmail.com>wrote:

> No need for Internetworking type as both are same FR.
>
> It seems to me "frame-relay DCE type" issue.
>
> Please try to remove "no frame-relay intf-type dce" on both R2/R8 and
> disable frame-relay switching.
>
> Regards,
> Anser
>
> On Tue, Nov 2, 2010 at 11:18 AM, Prakash Kalsaria <
> kalsaria.prakash_at_gmail.com> wrote:
>
>> From My Opinon
>> Interworking ip statment
>> in psudowire class is missing
>>
>> So try this one ...
>>
>> pseudowire-class L2TPV3
>> encapsulation l2tpv3
>> interworking ip
>> ip local interface Loopback0
>>
>> regards;
>> Prakash Kalsaria
>> http://prakashkalsaria.wordpress.com
>>
>>
>> On Tue, Nov 2, 2010 at 12:38 PM, Gaurav Thukral <pearlgaurav_at_gmail.com
>> >wrote:
>>
>> > Hi guys,
>> >
>> > I have the following diagram for L2TPv3
>> >
>> > R4---------FR--------R8-----------------R2----------FR--------R3
>> >
>> > R8 & R2 are PE and R4 & R3 are CE.
>> >
>> > I have done the following configuration on the devices.
>> >
>> > R8 & R2
>> >
>> > pseudowire-class L2TPV3
>> > encapsulation l2tpv3
>> > ip local interface Loopback0
>> >
>> > R4
>> >
>> > interface Serial0/0
>> > ip address 5.5.34.4 255.255.255.0
>> > encapsulation frame-relay IETF
>> > frame-relay map ip 5.5.34.3 408 broadcast
>> > frame-relay lmi-type ansi
>> >
>> > R3
>> >
>> > interface Serial0/0
>> > ip address 5.5.34.3 255.255.255.0
>> > encapsulation frame-relay IETF
>> > frame-relay map ip 5.5.34.4 302 broadcast
>> > frame-relay lmi-type ansi
>> >
>> > R8
>> >
>> > frame-relay switching
>> >
>> > int s0/0
>> > encapsulation frame-relay IETF
>> > frame-relay intf-type dce
>> > frame-relay lmi-type ansi
>> > frame-relay interface-dlci 804 switched
>> >
>> >
>> > connect L2TP Serial0/0 804 l2transport
>> > xconnect 5.5.2.2 28 pw-class L2TPV3
>> >
>> > R2
>> >
>> > frame-relay switching
>> >
>> > int s0/0
>> > encapsulation frame-relay IETF
>> > frame-relay intf-type dce
>> > frame-relay lmi-type ansi
>> > frame-relay interface-dlci 203 switched
>> >
>> > connect L2TP Serial0/0 203 l2transport
>> > xconnect 5.5.8.8 28 pw-class L2TPV3
>> >
>> > The L2tpv3 is not comming Up &
>> >
>> > in sh ip int brief on the routes it is showing line protocol down.
>> >
>> > Please tell me where i have done the configuration mistake?
>> >
>> > Regards,
>> > Gaurav
>> >
>> >
>> > Blogs and organic groups at http://www.ccie.net
>> >
>> > _______________________________________________________________________
>> > Subscription information may be found at:
>> > http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Nov 02 2010 - 14:10:11 ART