Re: OT: HWIC-3G-GSM Module Configration Problem...need help

What output do you see when you run below debugs suggested by ERDEM

debug chat
debug ppp negotiation
debug ppp error
debug ppp event

Regards,

Bilal

On Sun, Oct 31, 2010 at 12:45 AM, muhammad adnan <taurusadnan19_at_gmail.com>wrote:

> Dear
> i am using internet when i placed my sim in my cell phone.if the Data is
> not activated then how i can access.
>
> Thanks
>
>
>
>
>
> On Sat, Oct 30, 2010 at 3:36 PM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:
>
>> I am not sure if you've already done this but take the SIM card out from
>> the cellular module and put it in your SmartPhone - Sort out the activation
>> isssue first. Make sure data is activated on that SIM.
>>
>> Then play it once above is confirmed.
>>
>>
>>
>> On Sat, Oct 30, 2010 at 11:56 PM, muhammad adnan <taurusadnan19_at_gmail.com
>> > wrote:
>>
>>> Dear Bilal
>>> Router#show cellular 0/1/0 all
>>> Hardware Information
>>> ====================
>>> Modem Firmware Version = H1_1_9_3MCAP C:/WS/
>>> Modem Firmware built = 12/12/07
>>> Hardware Version = 1.0
>>> International Mobile Subscriber Identity (IMSI) = 606010105114370
>>> International Mobile Equipment Identity (IMEI) = 011359000487907
>>> Factory Serial Number (FSN) = D28026013381043
>>> Modem Status = Online
>>> Current Modem Temperature = 26 deg C, State = Normal
>>>
>>> Profile Information
>>> ====================
>>> Profile 1 = INACTIVE*
>>> --------
>>> PDP Type = IPv4
>>> Access Point Name (APN) = almadar.net
>>> Authentication = None
>>> Username: , Password:
>>>
>>> * - Default profile
>>>
>>> Data Connection Information
>>> ===========================
>>> Data Transmitted = 0 bytes, Received = 0 bytes
>>> Profile 1, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 2, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 3, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 4, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 5, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 6, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 7, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 8, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 9, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 10, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 11, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 12, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 13, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 14, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 15, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>> Profile 16, Packet Session Status = INACTIVE
>>> Inactivity Reason = Normal inactivate state
>>>
>>> Network Information
>>> ===================
>>> Current Service Status = Normal, Service Error = None
>>> Current Service = Combined
>>> Packet Service = GPRS (Attached)
>>> Packet Session Status = Inactive
>>> Current Roaming Status = Home
>>> Network Selection Mode = Automatic
>>> Country = 606, Network = 606 01
>>> Mobile Country Code (MCC) = 606
>>> Mobile Network Code (MNC) = 1
>>> Location Area Code (LAC) = 1
>>> Routing Area Code (RAC) = 1
>>> Cell ID = 11071
>>> Primary Scrambling Code = 0
>>> PLMN Selection = Automatic
>>> Registered PLMN = Libya Al Madar , Abbreviated = 606 01
>>> Service Provider = 606 01
>>>
>>> Radio Information
>>> =================
>>> Current Band = GSM 900, Channel Number = 5
>>> Current RSSI = -62 dBm
>>> Band Selected = Auto
>>>
>>> Modem Security Information
>>> ==========================
>>> Card Holder Verification (CHV1) = Disabled
>>> SIM Status = OK
>>> SIM User Operation Required = None
>>> Number of Retries remaining = 3
>>>
>>>
>>> Thanks
>>>
>>>
>>>
>>>
>>> On Sat, Oct 30, 2010 at 2:42 PM, Bilal Hansrod <bilal.hansrod_at_gmail.com
>>> >wrote:
>>>
>>> > Can you please send the output of *sh cell 0/1/0 all*
>>> >
>>> >
>>> > Bilal
>>> >
>>> >
>>> > On Sat, Oct 30, 2010 at 11:36 PM, muhammad adnan <
>>> taurusadnan19_at_gmail.com>wrote:
>>> >
>>> >> Dear Bilal i configure according to the Cisco Documentation
>>> >> and in my mail i pasted show run config...
>>> >>
>>> >>
>>> >>
>>> >>
>>> http://www.cisco.com/en/US/docs/routers/access/1800/1861/software/feature/guide/mrwlsgsm.html#wp1040391
>>> >>
>>> >> in my mail i ask that username and password is blank to access the
>>> >> internet
>>> >> Service provider ask me no authentication username and password blank
>>> ("i
>>> >> just put Apn in my phone and username and password blank and it works
>>> fine
>>> >> accessing the internet")
>>> >>
>>> >> if u need any more information kindly let me know again..
>>> >>
>>> >> Thanks
>>> >> Muhammad Adnan
>>> >>
>>> >>
>>> >>
>>> >> On Sat, Oct 30, 2010 at 2:28 PM, Bilal Hansrod <
>>> bilal.hansrod_at_gmail.com>wrote:
>>> >>
>>> >>> Hi Muhammad,
>>> >>>
>>> >>> I can't see a logical interface created for cell interface where you
>>> >>> define your PPP username/password and also the authentication method.
>>> >>>
>>> >>> An example from my config as below:
>>> >>>
>>> >>>
>>> >>> interface Dialer1
>>> >>> ip address negotiated
>>> >>> ip virtual-reassembly
>>> >>> encapsulation ppp
>>> >>> dialer pool 1
>>> >>> dialer idle-timeout 0
>>> >>> dialer string gsm
>>> >>> dialer persistent
>>> >>> dialer-group 1
>>> >>> no cdp enable
>>> >>> ppp authentication chap callin
>>> >>> ppp chap hostname XXX
>>> >>> ppp chap password YYY
>>> >>>
>>> >>>
>>> >>> Regards,
>>> >>>
>>> >>> Bilal
>>> >>>
>>> >>>
>>> >>> On Sat, Oct 30, 2010 at 11:05 PM, muhammad adnan <
>>> >>> taurusadnan19_at_gmail.com> wrote:
>>> >>>
>>> >>>> Dear Group members:-
>>> >>>> i am trying to configure the
>>> 3G-module.i
>>> >>>> have inserted my sim card into the HWIC module sim card properly
>>> >>>> working in
>>> >>>> the phone and i am accessing the internet.
>>> >>>> but when i configure HWIC module accordingly i am unable to access
>>> the
>>> >>>> internet my configration pasted below if any experience person guid
>>> me
>>> >>>> little.
>>> >>>>
>>> >>>>
>>> >>>> in my phone i just put APN and it work fine without Authentication
>>> >>>> *Service
>>> >>>> provider ask me* that the *username and password is blank..*
>>> >>>>
>>> >>>> country Libya
>>> >>>> GSM service provider =Almadar
>>> >>>> APN or access point name =almadar.net
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> *Router#show cellular 0/1/0 profile
>>> >>>> Profile 1 = INACTIVE*
>>> >>>> --------
>>> >>>> PDP Type = IPv4
>>> >>>> Access Point Name (APN) = almadar.net
>>> >>>> Authentication = None
>>> >>>> Username: , Password:
>>> >>>>
>>> >>>> * - Default profile
>>> >>>> *
>>> >>>>
>>> >>>>
>>> --------------------------------------------------------------------------------------
>>> >>>> *Router config*:
>>> >>>> *
>>> >>>> !
>>> >>>> !
>>> >>>> !
>>> >>>> multilink bundle-name authenticated
>>> >>>> !
>>> >>>> chat-script gsm "" "ATDT*99*1#" TIMEOUT 60 "CONNECT"
>>> >>>> !
>>> >>>> !
>>> >>>> !
>>> >>>> !
>>> >>>> interface Loopback0
>>> >>>> ip address 10.0.0.1 255.255.255.0
>>> >>>> !
>>> >>>> interface Wlan-GigabitEthernet0/0
>>> >>>> description Internal switch interface connecting to the embedded AP
>>> >>>> !
>>> >>>> interface GigabitEthernet0/0
>>> >>>> no ip address
>>> >>>> shutdown
>>> >>>> duplex auto
>>> >>>> speed auto
>>> >>>> !
>>> >>>> interface wlan-ap0
>>> >>>> description Service module interface to manage the embedded AP
>>> >>>> no ip address
>>> >>>> arp timeout 0
>>> >>>> no mop enabled
>>> >>>> no mop sysid
>>> >>>> !
>>> >>>> interface GigabitEthernet0/1
>>> >>>> no ip address
>>> >>>> shutdown
>>> >>>> duplex auto
>>> >>>> speed auto
>>> >>>> !
>>> >>>> interface ATM0/0/0
>>> >>>> no ip address
>>> >>>> shutdown
>>> >>>> no atm ilmi-keepalive
>>> >>>> !
>>> >>>> interface Cellular0/1/0
>>> >>>> ip address negotiated
>>> >>>> encapsulation ppp
>>> >>>> dialer in-band
>>> >>>> dialer idle-timeout 30
>>> >>>> dialer string gsm
>>> >>>> dialer-group 1
>>> >>>> async mode interactive
>>> >>>> ppp ipcp dns request
>>> >>>> !
>>> >>>> interface Vlan1
>>> >>>> no ip address
>>> >>>> !
>>> >>>> ip forward-protocol nd
>>> >>>> !
>>> >>>> no ip http server
>>> >>>> no ip http secure-server
>>> >>>> !
>>> >>>> ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
>>> >>>> !
>>> >>>> access-list 1 permit any
>>> >>>> dialer-list 1 protocol ip list 1
>>> >>>> !
>>> >>>> !
>>> >>>> !
>>> >>>> control-plane
>>> >>>> !
>>> >>>> !
>>> >>>> line con 0
>>> >>>> line aux 0
>>> >>>> line 0/1/0
>>> >>>> exec-timeout 0 0
>>> >>>> script dialer gsm
>>> >>>> login
>>> >>>> modem InOut
>>> >>>> no exec
>>> >>>> speed 80000
>>> >>>> line 67
>>> >>>> no activation-character
>>> >>>> no exec
>>> >>>> transport preferred none
>>> >>>> transport input all
>>> >>>> transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
>>> >>>> line vty 0 4
>>> >>>> login
>>> >>>> !
>>> >>>> scheduler allocate 20000 1000
>>> >>>> end*
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>>
>>> >>>> kindly Guid me
>>> >>>>
>>> >>>>
>>> >>>> Blogs and organic groups at http://www.ccie.net
>>> >>>>
>>> >>>>
>>> _______________________________________________________________________
>>> >>>> Subscription information may be found at:
>>> >>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 31 2010 - 01:01:22 ART