Dear
i am using internet when i placed my sim in my cell phone.if the Data is not
activated then how i can access.
Thanks
On Sat, Oct 30, 2010 at 3:36 PM, Radioactive Frog <pbhatkoti_at_gmail.com>wrote:
> I am not sure if you've already done this but take the SIM card out from
> the cellular module and put it in your SmartPhone - Sort out the activation
> isssue first. Make sure data is activated on that SIM.
>
> Then play it once above is confirmed.
>
>
>
> On Sat, Oct 30, 2010 at 11:56 PM, muhammad adnan <taurusadnan19_at_gmail.com>wrote:
>
>> Dear Bilal
>> Router#show cellular 0/1/0 all
>> Hardware Information
>> ====================
>> Modem Firmware Version = H1_1_9_3MCAP C:/WS/
>> Modem Firmware built = 12/12/07
>> Hardware Version = 1.0
>> International Mobile Subscriber Identity (IMSI) = 606010105114370
>> International Mobile Equipment Identity (IMEI) = 011359000487907
>> Factory Serial Number (FSN) = D28026013381043
>> Modem Status = Online
>> Current Modem Temperature = 26 deg C, State = Normal
>>
>> Profile Information
>> ====================
>> Profile 1 = INACTIVE*
>> --------
>> PDP Type = IPv4
>> Access Point Name (APN) = almadar.net
>> Authentication = None
>> Username: , Password:
>>
>> * - Default profile
>>
>> Data Connection Information
>> ===========================
>> Data Transmitted = 0 bytes, Received = 0 bytes
>> Profile 1, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 2, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 3, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 4, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 5, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 6, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 7, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 8, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 9, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 10, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 11, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 12, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 13, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 14, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 15, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>> Profile 16, Packet Session Status = INACTIVE
>> Inactivity Reason = Normal inactivate state
>>
>> Network Information
>> ===================
>> Current Service Status = Normal, Service Error = None
>> Current Service = Combined
>> Packet Service = GPRS (Attached)
>> Packet Session Status = Inactive
>> Current Roaming Status = Home
>> Network Selection Mode = Automatic
>> Country = 606, Network = 606 01
>> Mobile Country Code (MCC) = 606
>> Mobile Network Code (MNC) = 1
>> Location Area Code (LAC) = 1
>> Routing Area Code (RAC) = 1
>> Cell ID = 11071
>> Primary Scrambling Code = 0
>> PLMN Selection = Automatic
>> Registered PLMN = Libya Al Madar , Abbreviated = 606 01
>> Service Provider = 606 01
>>
>> Radio Information
>> =================
>> Current Band = GSM 900, Channel Number = 5
>> Current RSSI = -62 dBm
>> Band Selected = Auto
>>
>> Modem Security Information
>> ==========================
>> Card Holder Verification (CHV1) = Disabled
>> SIM Status = OK
>> SIM User Operation Required = None
>> Number of Retries remaining = 3
>>
>>
>> Thanks
>>
>>
>>
>>
>> On Sat, Oct 30, 2010 at 2:42 PM, Bilal Hansrod <bilal.hansrod_at_gmail.com
>> >wrote:
>>
>> > Can you please send the output of *sh cell 0/1/0 all*
>> >
>> >
>> > Bilal
>> >
>> >
>> > On Sat, Oct 30, 2010 at 11:36 PM, muhammad adnan <
>> taurusadnan19_at_gmail.com>wrote:
>> >
>> >> Dear Bilal i configure according to the Cisco Documentation
>> >> and in my mail i pasted show run config...
>> >>
>> >>
>> >>
>> >>
>> http://www.cisco.com/en/US/docs/routers/access/1800/1861/software/feature/guide/mrwlsgsm.html#wp1040391
>> >>
>> >> in my mail i ask that username and password is blank to access the
>> >> internet
>> >> Service provider ask me no authentication username and password blank
>> ("i
>> >> just put Apn in my phone and username and password blank and it works
>> fine
>> >> accessing the internet")
>> >>
>> >> if u need any more information kindly let me know again..
>> >>
>> >> Thanks
>> >> Muhammad Adnan
>> >>
>> >>
>> >>
>> >> On Sat, Oct 30, 2010 at 2:28 PM, Bilal Hansrod <
>> bilal.hansrod_at_gmail.com>wrote:
>> >>
>> >>> Hi Muhammad,
>> >>>
>> >>> I can't see a logical interface created for cell interface where you
>> >>> define your PPP username/password and also the authentication method.
>> >>>
>> >>> An example from my config as below:
>> >>>
>> >>>
>> >>> interface Dialer1
>> >>> ip address negotiated
>> >>> ip virtual-reassembly
>> >>> encapsulation ppp
>> >>> dialer pool 1
>> >>> dialer idle-timeout 0
>> >>> dialer string gsm
>> >>> dialer persistent
>> >>> dialer-group 1
>> >>> no cdp enable
>> >>> ppp authentication chap callin
>> >>> ppp chap hostname XXX
>> >>> ppp chap password YYY
>> >>>
>> >>>
>> >>> Regards,
>> >>>
>> >>> Bilal
>> >>>
>> >>>
>> >>> On Sat, Oct 30, 2010 at 11:05 PM, muhammad adnan <
>> >>> taurusadnan19_at_gmail.com> wrote:
>> >>>
>> >>>> Dear Group members:-
>> >>>> i am trying to configure the
>> 3G-module.i
>> >>>> have inserted my sim card into the HWIC module sim card properly
>> >>>> working in
>> >>>> the phone and i am accessing the internet.
>> >>>> but when i configure HWIC module accordingly i am unable to access
>> the
>> >>>> internet my configration pasted below if any experience person guid
>> me
>> >>>> little.
>> >>>>
>> >>>>
>> >>>> in my phone i just put APN and it work fine without Authentication
>> >>>> *Service
>> >>>> provider ask me* that the *username and password is blank..*
>> >>>>
>> >>>> country Libya
>> >>>> GSM service provider =Almadar
>> >>>> APN or access point name =almadar.net
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>> *Router#show cellular 0/1/0 profile
>> >>>> Profile 1 = INACTIVE*
>> >>>> --------
>> >>>> PDP Type = IPv4
>> >>>> Access Point Name (APN) = almadar.net
>> >>>> Authentication = None
>> >>>> Username: , Password:
>> >>>>
>> >>>> * - Default profile
>> >>>> *
>> >>>>
>> >>>>
>> --------------------------------------------------------------------------------------
>> >>>> *Router config*:
>> >>>> *
>> >>>> !
>> >>>> !
>> >>>> !
>> >>>> multilink bundle-name authenticated
>> >>>> !
>> >>>> chat-script gsm "" "ATDT*99*1#" TIMEOUT 60 "CONNECT"
>> >>>> !
>> >>>> !
>> >>>> !
>> >>>> !
>> >>>> interface Loopback0
>> >>>> ip address 10.0.0.1 255.255.255.0
>> >>>> !
>> >>>> interface Wlan-GigabitEthernet0/0
>> >>>> description Internal switch interface connecting to the embedded AP
>> >>>> !
>> >>>> interface GigabitEthernet0/0
>> >>>> no ip address
>> >>>> shutdown
>> >>>> duplex auto
>> >>>> speed auto
>> >>>> !
>> >>>> interface wlan-ap0
>> >>>> description Service module interface to manage the embedded AP
>> >>>> no ip address
>> >>>> arp timeout 0
>> >>>> no mop enabled
>> >>>> no mop sysid
>> >>>> !
>> >>>> interface GigabitEthernet0/1
>> >>>> no ip address
>> >>>> shutdown
>> >>>> duplex auto
>> >>>> speed auto
>> >>>> !
>> >>>> interface ATM0/0/0
>> >>>> no ip address
>> >>>> shutdown
>> >>>> no atm ilmi-keepalive
>> >>>> !
>> >>>> interface Cellular0/1/0
>> >>>> ip address negotiated
>> >>>> encapsulation ppp
>> >>>> dialer in-band
>> >>>> dialer idle-timeout 30
>> >>>> dialer string gsm
>> >>>> dialer-group 1
>> >>>> async mode interactive
>> >>>> ppp ipcp dns request
>> >>>> !
>> >>>> interface Vlan1
>> >>>> no ip address
>> >>>> !
>> >>>> ip forward-protocol nd
>> >>>> !
>> >>>> no ip http server
>> >>>> no ip http secure-server
>> >>>> !
>> >>>> ip route 0.0.0.0 0.0.0.0 Cellular0/1/0
>> >>>> !
>> >>>> access-list 1 permit any
>> >>>> dialer-list 1 protocol ip list 1
>> >>>> !
>> >>>> !
>> >>>> !
>> >>>> control-plane
>> >>>> !
>> >>>> !
>> >>>> line con 0
>> >>>> line aux 0
>> >>>> line 0/1/0
>> >>>> exec-timeout 0 0
>> >>>> script dialer gsm
>> >>>> login
>> >>>> modem InOut
>> >>>> no exec
>> >>>> speed 80000
>> >>>> line 67
>> >>>> no activation-character
>> >>>> no exec
>> >>>> transport preferred none
>> >>>> transport input all
>> >>>> transport output pad telnet rlogin lapb-ta mop udptn v120 ssh
>> >>>> line vty 0 4
>> >>>> login
>> >>>> !
>> >>>> scheduler allocate 20000 1000
>> >>>> end*
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>>
>> >>>> kindly Guid me
>> >>>>
>> >>>>
>> >>>> Blogs and organic groups at http://www.ccie.net
>> >>>>
>> >>>>
>> _______________________________________________________________________
>> >>>> Subscription information may be found at:
>> >>>> http://www.groupstudy.com/list/CCIELab.html
>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net
Received on Sat Oct 30 2010 - 15:45:09 ART
This archive was generated by hypermail 2.2.0 : Mon Nov 01 2010 - 06:42:06 ART