intervlan routing issue

Hello Experts ,

I m having some issue with intervlan routing , I have cisco 1841 router
connected with cisco 2960 poe switch , some reason I m not able to access from
Network A to network B please see below the configuration of router , One
thing I would like mention here I m using LLDP Run on Cisco switch for Avaya
Ip phones . and on router running OSPF for DMVPN only 10.0.95.x Subnet
advertize across the DMVPN ospf . please advice .

interface FastEthernet0/0
 description UPLINK WITH SAUDI LL
 ip address 77.221.97.122 255.255.255.248
 ip nat outside
 ip virtual-reassembly
 ip route-cache flow
 load-interval 30
 duplex auto
 speed auto
!
interface FastEthernet0/1
 no ip address
 no ip redirects
 load-interval 30
 duplex auto
 speed auto
!
interface FastEthernet0/1.3
 encapsulation dot1Q 3 native
 ip address 10.0.95.x 255.255.255.0
 no ip redirects
 ip nat inside
 ip virtual-reassembly
!
interface FastEthernet0/1.100
 encapsulation dot1Q 100
 ip address 10.0.96.x 255.255.255.0
 no ip redirects
!

Switch Port config connected with Router

interface FastEthernet0/24
 description UPLINK TO CISCO ROUTER
 switchport trunk native vlan 3
 switchport trunk allowed vlan 3,100
 switchport mode trunk
 switchport nonegotiate
 switchport voice vlan 100
 load-interval 30
 spanning-tree portfast
end

Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 12 2010 - 19:47:38 ART