Sameer, this is not company confidential stuff you've put out on a mailing list is it?!
Sent using BlackBerry. from Orange
-----Original Message-----
From: sameer inam <i_sameer_at_hotmail.com>
Sender: nobody_at_groupstudy.com
Date: Tue, 12 Oct 2010 19:47:38
To: <ccielab_at_groupstudy.com>
Reply-To: sameer inam <i_sameer_at_hotmail.com>
Subject: intervlan routing issue
Hello Experts ,
I m having some issue with intervlan routing , I have cisco 1841 router
connected with cisco 2960 poe switch , some reason I m not able to access from
Network A to network B please see below the configuration of router , One
thing I would like mention here I m using LLDP Run on Cisco switch for Avaya
Ip phones . and on router running OSPF for DMVPN only 10.0.95.x Subnet
advertize across the DMVPN ospf . please advice .
interface FastEthernet0/0
description UPLINK WITH SAUDI LL
ip address 77.221.97.122 255.255.255.248
ip nat outside
ip virtual-reassembly
ip route-cache flow
load-interval 30
duplex auto
speed auto
!
interface FastEthernet0/1
no ip address
no ip redirects
load-interval 30
duplex auto
speed auto
!
interface FastEthernet0/1.3
encapsulation dot1Q 3 native
ip address 10.0.95.x 255.255.255.0
no ip redirects
ip nat inside
ip virtual-reassembly
!
interface FastEthernet0/1.100
encapsulation dot1Q 100
ip address 10.0.96.x 255.255.255.0
no ip redirects
!
Switch Port config connected with Router
interface FastEthernet0/24
description UPLINK TO CISCO ROUTER
switchport trunk native vlan 3
switchport trunk allowed vlan 3,100
switchport mode trunk
switchport nonegotiate
switchport voice vlan 100
load-interval 30
spanning-tree portfast
end
Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 12 2010 - 20:07:43 ART
This archive was generated by hypermail 2.2.0 : Mon Nov 01 2010 - 06:42:06 ART