Re: FXO Question

Thanks Ryan,

I went with the following:

dial-peer voice 20 pots
 description Outbound Local
 preference 4
 destination-pattern 9T
 port 0/2/0
!
dial-peer voice 21 pots
 description Outbound Local
 preference 3
 destination-pattern 9T
 port 0/2/1
!
dial-peer voice 22 pots
 description Outbound Local
 preference 2
 destination-pattern 9T
 port 0/2/2
!
dial-peer voice 23 pots
 description Outbound Local
 preference 1
 destination-pattern 9T
 port 0/2/3
!

I appreciate the help!

-Bobby

On Mon, Oct 4, 2010 at 4:46 PM, Ryan West <rwest_at_zyedge.com> wrote:

> Create a trunk group or set preferences and use the same destination for
> each dial-peer.
>
> Sent from handheld
>
> On Oct 4, 2010, at 7:16 PM, "Robert Kimble" <hoodooman21_at_gmail.com> wrote:
>
> > All,
> >
> > I have a CCME with a vic2-4FXO card connected to 4 POTS lines. I'm trying
> to
> > configure the dial peer in a way that will let users dial 8 and have the
> > call sent out of the first available POTS line. In other words if one is
> > busy then CCME will send the call out of the next line.
> >
> > I'm sure this is relatively simple, but I'm having some trouble figuring
> > this one out.
> >
> > Any help is much appreciated!
> >
> > Thanks,
> >
> > Bobby
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Oct 05 2010 - 09:15:17 ART