Re: FXO Question

Hi Robert,

I have prepared a sample config for you. There might be *Some* typo as I
have typed it out straight off my head.

config t
 trunk group 10 ! create trunk-group 10

voice-port 0/2/0
 trunk-group 10 1 ! trunk-group member port1

voice-port 0/2/1
 trunk-group 10 2 ! trunk-group member port2

voice-port 0/2/2
 trunk-group 10 3 ! trunk-group member port3

voice-port 0/2/3
 trunk-group 10 4 ! trunk-group member port4

Now apply the above trunk group
    dial-peer voice 20 pots
     description Outbound Local
     preference 4
     destination-pattern 9T
     trunk-group 10
     port 0/2/0
    !
    dial-peer voice 21 pots
     description Outbound Local
     preference 3
     destination-pattern 9T
     trunk-group 10

     port 0/2/1
    !
    dial-peer voice 22 pots
     description Outbound Local
     preference 2
     destination-pattern 9T
     trunk-group 10
     port 0/2/2
    !
    dial-peer voice 23 pots
     description Outbound Local
     preference 1
     destination-pattern 9T
     trunk-group 10
     port 0/2/3
    !

On Wed, Oct 6, 2010 at 3:15 AM, Robert Kimble <hoodooman21_at_gmail.com> wrote:

> Thanks Ryan,
>
> I went with the following:
>
> dial-peer voice 20 pots
> description Outbound Local
> preference 4
> destination-pattern 9T
> port 0/2/0
> !
> dial-peer voice 21 pots
> description Outbound Local
> preference 3
> destination-pattern 9T
> port 0/2/1
> !
> dial-peer voice 22 pots
> description Outbound Local
> preference 2
> destination-pattern 9T
> port 0/2/2
> !
> dial-peer voice 23 pots
> description Outbound Local
> preference 1
> destination-pattern 9T
> port 0/2/3
> !
>
> I appreciate the help!
>
> -Bobby
>
>
> On Mon, Oct 4, 2010 at 4:46 PM, Ryan West <rwest_at_zyedge.com> wrote:
>
> > Create a trunk group or set preferences and use the same destination for
> > each dial-peer.
> >
> > Sent from handheld
> >
> > On Oct 4, 2010, at 7:16 PM, "Robert Kimble" <hoodooman21_at_gmail.com>
> wrote:
> >
> > > All,
> > >
> > > I have a CCME with a vic2-4FXO card connected to 4 POTS lines. I'm
> trying
> > to
> > > configure the dial peer in a way that will let users dial 8 and have
> the
> > > call sent out of the first available POTS line. In other words if one
> is
> > > busy then CCME will send the call out of the next line.
> > >
> > > I'm sure this is relatively simple, but I'm having some trouble
> figuring
> > > this one out.
> > >
> > > Any help is much appreciated!
> > >
> > > Thanks,
> > >
> > > Bobby
> > >
> > >
> > > Blogs and organic groups at http://www.ccie.net
> > >
> > > _______________________________________________________________________
> > > Subscription information may be found at:
> > > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Oct 06 2010 - 21:09:09 ART