Re: ASA Transparent mode --- Need HELP !!!

Hi,

You must use multi-context transparent mode and bridge 2 different VLANs in
each context. In such scenario I use FWSM as this has capability of using up
to 8 bridge groups in one context.

HTH,

--
Piotr Matusiak
CCIE #19860 (R&S, Security)
Technical Instructor
website: www.MicronicsTraining.com
blog: www.ccie1.com
If you can't explain it simply, you don't understand it well enough -
Albert Einstein
2010/10/3 Haider Ali <ccie.aly.110_at_gmail.com>
> Hi Friends,
> I need your help regarding the deployment of ASA5550 in transparent mode.
> Please reffer to below network diagram.
>
> HO ---Dark'fiber--- DR'Site---- Core switch---- ASA5550----Access'SW.
>
>
> We have to place the ASA5550 in the DR site in between the Core swtich and
> the Access layer switch. There are multiple VLANs on Core-Sw and same on
> the
> Access-sw. What we have to do is, we want multiple VLANs on Core to talk to
> ACCESS-Sw via ASA. I am using the ASA in single mode. And this single mode
> is restricting me to use the same different network on both sides of the
> ASA. But as i have mentioned we have multiple VLANs, so we do have multiple
> subnets. So my ques is, is it possible to make this thing work in ASA5550 ?
> or its a device limitation ?
>
> Did any1 configured the above mentioned scenario? Please shed some light on
> this. Your immidiate help will be highly appriciated.
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
Blogs and organic groups at http://www.ccie.net