Re: ASA Transparent mode --- Need HELP !!!

L2TPV3 is the answer - basically you want to span your VLAN over DarkFiber.
Or if your core switch is Cisco Nexus 7XXX then you may use OTV.

On Sun, Oct 3, 2010 at 7:48 PM, Haider Ali <ccie.aly.110_at_gmail.com> wrote:

> Hi Friends,
> I need your help regarding the deployment of ASA5550 in transparent mode.
> Please reffer to below network diagram.
>
> HO ---Dark'fiber--- DR'Site---- Core switch---- ASA5550----Access'SW.
>
>
> We have to place the ASA5550 in the DR site in between the Core swtich and
> the Access layer switch. There are multiple VLANs on Core-Sw and same on
> the
> Access-sw. What we have to do is, we want multiple VLANs on Core to talk to
> ACCESS-Sw via ASA. I am using the ASA in single mode. And this single mode
> is restricting me to use the same different network on both sides of the
> ASA. But as i have mentioned we have multiple VLANs, so we do have multiple
> subnets. So my ques is, is it possible to make this thing work in ASA5550 ?
> or its a device limitation ?
>
> Did any1 configured the above mentioned scenario? Please shed some light on
> this. Your immidiate help will be highly appriciated.
>
> Thanks.
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Oct 03 2010 - 21:10:04 ART