Re: E1 interface

Hi,

Please provide the show controller output when a physical loop is
applied to the port and the controller clock is set to internal.

Also remember that the E1 pins outs are different to Ethernet eventhough
they both physically present on an RJ45.

regards Andy

Abiola Jewoola wrote:
> hello GS
>
> i have a VWIC-1MFT-E1 card installed on a 3700 series router which is to be
> connected to an E1 radio for data traffic . i have done the initial config in
> bringing the E1 card up
>
>
> But the E1 interface is still down
>
> controller E1 1/0
> framing crc4
> linecode hdb3
> channel-group 0 timeslots 1-31
> no shut
>
>
> i can see the serial interface when i do sh ip int bri and sh ver
>
> Any ideas as to why d e1 int is down?
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Sep 14 2010 - 19:21:17 ART