Re: Copy via Http

I apologise that i should have clarified. Im running hypervisor
( GNS3) for routers and 4 physical 3550 switch. As per Davids
suggestion , im able to get few successful Transfer and them get
bromen pipe error

Thanks & Regards,
Bilal Hansrod

Sent from my iPhone

On 23/08/2010, at 11:24 PM, Stephen Amaki <swamaki_at_gmail.com> wrote:

> Oh wait, are you running some type of hardware as in 3550/3560? If
> not, it is not possible the image c3550-ipservicesk9-mz.
> 122-44.SE2.bin is in the flash unless you dumped it in there.
> Dynamips is virtual.
>
> Do a "sh flash:" If you dont see c3550-ipservicesk9-mz.
> 122-44.SE2.bin, you cannot copy it. Think about it, you're copying a
> file that does not exist.
>
> Steve.
>
>
> On Mon, Aug 23, 2010 at 8:59 AM, Bilal Hansrod <bilal.hansrod_at_gmail.com
> > wrote:
> Stephen,
>
> I wanted to pull config from SW2 back to R4. i was just wondering
> how is below example helps my task. Any suggestions!
>
> Regards,
>
> Bilal
>
>
>
> On Mon, Aug 23, 2010 at 11:02 AM, Stephen Amaki <swamaki_at_gmail.com>
> wrote:
> Hi Bilal,
>
> Dynamips/dynagen/gns3 will not store the ios image in the flash. The
> workaround this if you are looking to generate some http traffic is
> to create an exception dump in the flash.
>
> You can then do a : copy http://cisco:cisco@150.1.6.6/R6-core.Z null:
>
> HTH
> here's what you do:
>
> 1. Increase flash size for particular device in the GNS3
> (= right click on the device-> configure-> Memories and disks - >
> PCMCIA disk0 size: 99MB)
>
> 2. Use flash for Core Dumps:
> R6(config)#exception flash all flash:
>
> 3. R6#reload
>
> [confirm] yes
> Wait until process for core dump is finished and you just see
> something like below constantly repeated in your terminal:
>
> %ALIGN-1-FATAL: Corrupted program......
>
> 4."Stop" the device in GNS3 and then "Start"
>
> 5.R6#show flash:
>
> System CompactFlash directory:
> File Length Name/status
> 1 151350 crashinfo_20020301-000729
> 2 50640 R6-coreiomen.Z
> 3 64737571 R6-core.Z
>
>
>
>
>
> On Sun, Aug 22, 2010 at 8:05 PM, Bilal Hansrod <bilal.hansrod_at_gmail.com
> > wrote:
> Thanks David, i will try and let you know.
>
>
> Thanks & Regards,
> Bilal Hansrod
>
> Sent from my iPhone
>
>
> On 23/08/2010, at 8:42 AM, "David Prall" <dcp_at_dcptech.com> wrote:
>
> What happens if you do:
> copy http://150.1.8.8/c3550-ipservicesk9-mz.122-44.SE2.bin null:
>
> From the prompts it is putting 150.1.8.8 as both the server and part
> of the
> filename.
>
> David
>
> --
> http://dcp.dcptech.com
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf
> Of
> Bilal Hansrod
> Sent: Sunday, August 22, 2010 6:31 PM
> To: ccielab_at_groupstudy.com
> Subject: Fwd: Copy via Http
>
> Any expert advise? Thanks in advance
>
> Thanks & Regards,
> Bilal Hansrod
>
> Sent from my iPhone
>
>
> Begin forwarded message:
>
> From: Bilal Hansrod <bilal.hansrod_at_gmail.com>
> Date: 23 August 2010 1:21:51 AM AEST
> To: Cisco certification <ccielab_at_groupstudy.com>
> Subject: Copy via Http
>
>
> Hello Guys,
>
> I am trying to copy a file from switch using http protocol. I am
> using GNS3 and was working on INE Workbook 1, task 3.15 (PfR)
>
> The configuration done on router as below:
>
> no ip http server
> no ip http secure-server
> ip http client source-interface Loopback0
> ip http client username cisco
> ip http client password 0 cisco
>
>
> The switch configuration as below:
>
> ip http server
> no ip http secure-server
> ip http path flash:
>
>
> The command running on router as below:
> copy http:150.1.8.8/c3550-ipservicesk9-mz.122-44.SE2.bin null:
>
> Unfortunately, I am getting error as below:
>
> Address or name of remote host [150.1.8.8]?
> Source filename [150.1.8.8/c3550-ipservicesk9-mz.122-44.SE2.bin]?
> %Error opening http://150.1.8.8/150.1.8.8/c3550-ipservicesk9-mz.122-
> 44.SE2.bin
> (No such file or directory)
>
>
> Any help would be highly appreciated!
>
> Regards,
>
> Bilal
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
 

>
>
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
 

> Subscription information may be found at:http://www.groupstudy.com/
> list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Aug 24 2010 - 05:13:58 ART