RE: DMVPN routing

ok I m just trying to clear my question , I need redistrube my static routes
in to OSPF using route map , so for example if I have remote side 10.0.55.0/24
and hub side is connected to internet no private network but hub side router
is conected with Firewall and firewall is connected to Layer 2 cisco switch on
10.0.1.0/24 network , so if I run DMVPN on it using OSPF , at hub side router
if I define Static route point to internet gateway or GRE tunnel ,like

ip route 10.0.55.0 255.255.255.0 internet gateway IP

or

ip route 10.0.55.0 255.255.255.0 tunnel 1

please advice

> From: tscott_at_ipexpert.com
> To: i_sameer_at_hotmail.com; ccielab_at_groupstudy.com
> Subject: RE: DMVPN routing
> Date: Mon, 5 Jul 2010 09:28:12 -0400
>
> Sameer,
>
> DMVPN will require building a new subnet for routing within the DMVPN. This
> new network can be whatever you want it to be so I am not sure how to
direct
> you in this as I am confused by the direction of your question.
>
> So you would create a Tunnel interface on the hub and spokes with a new IP
> address range, whatever you choose. Then run OSPF over it.
>
> Regards,
>
> Tyson Scott - CCIE #13513 R&S, Security, and SP
> Managing Partner / Sr. Instructor - IPexpert, Inc.
> Mailto: tscott_at_ipexpert.com
>
>
>
> -----Original Message-----
> From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> sameer inam
> Sent: Monday, July 05, 2010 8:06 AM
> To: ccielab_at_groupstudy.com
> Subject: DMVPN routing
>
> Experts ,
>
>
>
> Again I need your guys help , I have some static routes which I
> redistribute
> into OSPF so that these routes get advertised into my OSPF domain , I use
> route map to redistribute as I want custom metric and also routes to be
> advertised as type 1 . I tested and its working fine , But now I want biuld
> the DMVPN cloud using OSPF , my question is my DMVPN Hub router is on
> internet
> side and its doesnt have private IP address on the router interface both Ip
> address are public Ip , Once I will biuld DMVPN cloud so can it will Meshed
> network using OSPF ? or Do I need to connect my router in to local Lan and
> then advertise my private range into OSPF .static routes is sendng the
> traffic
> to internet gateway . please see below route
>
>
>
> Ip address 10.0.52.0 255.255.255.0 internet gateway
>
>
>
> router ospf 1
>
>
>
> redistribute static subnets route-map CISCO
>
>
>
>
>
> route-map CISCO permit 10
>
> match ip address 10
>
> set matric 500
>
> set matric-type type-1
>
>
>
> access-list 10 per 10.0.52.0
>
>
>
>
>
>
>
> what do you think if I change route from internet gateway to GRE tunnel ?
it
> will make any differnce
>
>
>
> thanks for your help in advance
>
>
>
> Kind regards ,
>
>
>
> Sameer
>
>
>
>
>
> _________________________________________________________________
> Hotmail: Powerful Free email with security by Microsoft.
> https://signup.live.com/signup.aspx?id=60969
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
Received on Tue Jul 06 2010 - 09:02:00 ART