RE: DMVPN routing

Sameer,

DMVPN will require building a new subnet for routing within the DMVPN. This
new network can be whatever you want it to be so I am not sure how to direct
you in this as I am confused by the direction of your question.

So you would create a Tunnel interface on the hub and spokes with a new IP
address range, whatever you choose. Then run OSPF over it.

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP
Managing Partner / Sr. Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
sameer inam
Sent: Monday, July 05, 2010 8:06 AM
To: ccielab_at_groupstudy.com
Subject: DMVPN routing

Experts ,

Again I need your guys help , I have some static routes which I
redistribute
into OSPF so that these routes get advertised into my OSPF domain , I use
route map to redistribute as I want custom metric and also routes to be
advertised as type 1 . I tested and its working fine , But now I want biuld
the DMVPN cloud using OSPF , my question is my DMVPN Hub router is on
internet
side and its doesnt have private IP address on the router interface both Ip
address are public Ip , Once I will biuld DMVPN cloud so can it will Meshed
network using OSPF ? or Do I need to connect my router in to local Lan and
then advertise my private range into OSPF .static routes is sendng the
traffic
to internet gateway . please see below route

Ip address 10.0.52.0 255.255.255.0 internet gateway

router ospf 1

redistribute static subnets route-map CISCO

route-map CISCO permit 10

match ip address 10

set matric 500

set matric-type type-1

access-list 10 per 10.0.52.0

what do you think if I change route from internet gateway to GRE tunnel ? it
will make any differnce

thanks for your help in advance

Kind regards ,

Sameer
Received on Mon Jul 05 2010 - 09:28:12 ART