Re: FR-MLP and traffic-shaping

Hi Raghav, and all experts,
legacy frame-relay traffic-shaping, that is '(config-if) frame-relay
traffic-shaping' is incompatible with MQC traffic-shaping which is the
one that I am trying to use!

I have expanded the lab a little bit so that we have s1/0 and s1/1 part
of the FR-MLP while s1/2 is just a plain FR connection with r2.
On all serial I have applied MQC FR-TS and I can see it on s1/2, but not
on s1/0 or s1/1 !
How can I verify the TS is active for FR-MLP?

r1#show policy-map interface output
 Serial1/2: DLCI 122 -

  Service-policy output: FRTS

    Class-map: class-default (match-any)
      21012 packets, 29985108 bytes
      30 second offered rate 0 bps, drop rate 0 bps
      Match: any
      Queueing
      queue limit 64 packets
      (queue depth/total drops/no-buffer drops) 0/20279/0
      (pkts output/bytes output) 733/1025992
      shape (average) cir 20000, bc 80, be 80
      target shape rate 20000
        lower bound cir 0, adapt to fecn 0

~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

policy-map FRTS
 class class-default
    shape average 20000
!
interface Multilink1
 ip address 1.0.0.1 255.255.255.0
 ppp multilink
 ppp multilink group 1
!
interface Serial1/0
 no ip address
 encapsulation frame-relay
 serial restart-delay 0
 frame-relay interface-dlci 102 ppp Virtual-Template199
  class FRTS
!
interface Serial1/1
 no ip address
 encapsulation frame-relay
 serial restart-delay 0
 frame-relay interface-dlci 112 ppp Virtual-Template199
  class FRTS
!
interface Serial1/2
 description * r2 s1/2 *
 ip address 1.0.1.1 255.255.255.252
 encapsulation frame-relay
 load-interval 30
 serial restart-delay 0
 frame-relay interface-dlci 122
  class FRTS
!
interface Virtual-Template199
 no ip address
 ppp multilink
 ppp multilink group 1
!
map-class frame-relay FRTS
 service-policy output FRTS

On Sat, 2010-05-01 at 13:23 -0700, Raghav Bhargava wrote:
> Hi Bit,
>
> I think you are missing frame-relay traffic-shaping command on the
> interface..
>
>
>
> On Sat, May 1, 2010 at 12:09 PM, Bit Gossip <bit.gossip_at_chello.nl>
> wrote:
> Experts,
> I have configured this feature and also applied TS in the MQC
> form to
> the pvc because the documentation says that it must be
> enabled....
> It is working in so far the interface is up and I can ping;
> but I can
> not verify TS.
>
> r1#show policy-map interface multilink 1
> r1#show policy-map interface virtual-template 199
> r1#show policy-map interface s1/0
> r1#show policy-map interface s1/1
>
> r1#show frame-relay pvc interface s1/0 102
>
> PVC Statistics for interface Serial1/0 (Frame Relay DTE)
>
> DLCI = 102, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE
> =
> Serial1/0
>
> input pkts 2464 output pkts 2438 in bytes
> 74407
> out bytes 72112 dropped pkts 0 in pkts
> dropped
> 0
> out pkts dropped 0 out bytes dropped 0
> in FECN pkts 0 in BECN pkts 0 out FECN
> pkts 0
> out BECN pkts 0 in DE pkts 0 out DE pkts
> 0
> out bcast pkts 0 out bcast bytes 0
> 5 minute input rate 0 bits/sec, 0 packets/sec
> 5 minute output rate 0 bits/sec, 0 packets/sec
> pvc create time 03:12:24, last time pvc status changed
> 02:46:30
> Bound to Virtual-Access1 (up, cloned from
> Virtual-Template199)
>
>
> r1#show traffic-shape s1/0
> Traffic shaping not configured on Serial1/0
> r1#show traffic-shape virtual-access 1
> Traffic shaping not configured on Virtual-Access1
> r1#show traffic-shape virtual-template 199
> Traffic shaping not configured on Virtual-Template199
> r1#show traffic-shape multilink 1
> Traffic shaping not configured on Multilink1
> r1#
>
> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
>
> policy-map FRTS
> class class-default
> shape average 32000
> !
> interface Multilink1
> ip address 1.0.0.1 255.255.255.0
> ppp multilink
> ppp multilink group 1
> !
> interface Serial1/0
> no ip address
> encapsulation frame-relay
> frame-relay interface-dlci 102 ppp Virtual-Template199
> class FRTS
> !
> interface Serial1/1
> no ip address
> encapsulation frame-relay
> frame-relay interface-dlci 112 ppp Virtual-Template199
> class FRTS
> !
> interface Virtual-Template199
> no ip address
> ppp multilink
> ppp multilink group 1
> !
> map-class frame-relay FRTS
> service-policy output FRTS
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>
>
>
> --
> Warm Regards
> Raghav

Blogs and organic groups at http://www.ccie.net
Received on Sun May 02 2010 - 10:01:45 ART