for verification bgp update

Hi guys

As you see below by applying a route map to ibgp neighbor Itried to prevent
any routes include as 54 to go to neighbor.It seems work.But I am unable to
verify it via any debug command.I want to see in the debug output because of
this this prefix can not be advertised .How can I see this kind of output?

Rack1R6#sh run | s bgp
router bgp 100
 no synchronization
 bgp router-id 150.1.6.6
 bgp log-neighbor-changes
 neighbor 54.1.3.254 remote-as 54
 neighbor 136.1.136.1 remote-as 100
 neighbor 136.1.136.1 route-map 23 out
 neighbor 136.1.136.3 remote-as 100
 neighbor 136.1.136.3 route-map 23 out
 neighbor 204.12.1.254 remote-as 54
 no auto-summary
Rack1R6#Rack1R6#sh route-map
route-map 23, deny, sequence 10
  Match clauses:
    as-path (as-path filter): 23
  Set clauses:
  Policy routing matches: 0 packets, 0 bytes
route-map 23, permit, sequence 20
  Match clauses:
  Set clauses:
  Policy routing matches: 0 packets, 0 bytes

Blogs and organic groups at http://www.ccie.net
Received on Sun May 02 2010 - 12:10:44 ART