Re: SSH - Process Intensive

I Tried to Shift Back to Telnet and i am observing a similar HANGing and
Delay

#show processes cpu | exclude 0.00
CPU utilization for five seconds: 99%/0%; one minute: 27%; five minutes: 11%
 PID Runtime(ms) Invoked uSecs 5Sec 1Min 5Min TTY Process
  46 567 11204 50 1.38% 0.27% 0.09% 0 Fifo Error
Detec
 108 339 5138 65 0.46% 0.09% 0.04% 0 Hulc LED
Process
 116 134 67 2000 0.15% 0.06% 0.01% 0 HQM Stack
Proces
 163 166 531 312 0.15% 0.05% 0.02% 0 IP Input
 192 3940 528 7462 0.76% 1.44% 0.87% 0 Marvell wk-a
Pow
 203 136 49 2775 0.46% 0.08% 0.01% 0 AAA
Accounting
* 204 16628 192 86604 88.58% 18.43% 4.06% 7 Virtual Exec
*
 233 17185 327 52553 2.31% 1.47% 2.84% 6 Virtual Exec

Although My Command is exactly alright

#copy flash:/c3560-ipbase-mz.122-35.SE5/html/images/confirm.gif
tftp:confirm.gif
Address or name of remote host []? 10.10.10.10
Destination filename [confirm.gif]?
!!
515 bytes copied in 0.008 secs (64375 bytes/sec)

As Soon as i Hit Enter after this command :

#copy flash:/c3560-ipbase-mz.122-35.SE5/html/images/confirm.gif
tftp:confirm.gif

The Prompt HALT for some time and when i check the process CPU Utilization
it gives above output.

Is there any way - i can copy the WHOLE directory content in one command?

I tried to Delete it with * , and it works . But the same * is not working
to Copy.

Any Idea?

Regards,
Nauman

Blogs and organic groups at http://www.ccie.net
Received on Tue Apr 20 2010 - 10:30:37 ART