RE: Cme using 7962 and 7915

Rob,

> -----Original Message-----
> Sent: Thursday, March 04, 2010 8:46 AM
> To: Cisco Certification
> Subject: Cme using 7962 and 7915
>
> Hi Guys,
> I was unable to configure using CME to manage the 7915 add-ons.
> At this point I have defined 7962 terminal type adding 7915 12 add-on
> but they remain in ambar. The rest of IpPhones works properly.
> In this way, I also added a .sbn at the tftp availables to boot, but no
> results.
> What I'm missing?
> Cheers,
> RobClav

Sounds like you might be running into:

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp57602

and

http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp148779

Basically a firmware upgrade that skips a revision needs to be backed up to the non SR release. Then upgraded from there to the SR release.

The links are for CM 4.2 - 8.0, but the 4.2 - 4.3 links are relevant to CME.

-ryan

Blogs and organic groups at http://www.ccie.net
Received on Thu Mar 04 2010 - 15:50:18 ART