Re: Cme using 7962 and 7915

Ryan, bingo!!! You right, now it's working

2010/3/4 Ryan West <rwest_at_zyedge.com>

> Rob,
>
> > -----Original Message-----
> > Sent: Thursday, March 04, 2010 8:46 AM
> > To: Cisco Certification
> > Subject: Cme using 7962 and 7915
> >
> > Hi Guys,
> > I was unable to configure using CME to manage the 7915 add-ons.
> > At this point I have defined 7962 terminal type adding 7915 12 add-on
> > but they remain in ambar. The rest of IpPhones works properly.
> > In this way, I also added a .sbn at the tftp availables to boot, but no
> > results.
> > What I'm missing?
> > Cheers,
> > RobClav
>
> Sounds like you might be running into:
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp57602
>
> and
>
>
> http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/firmware/8_5_2/english/release/notes/7900_852SR1.html#wp148779
>
> Basically a firmware upgrade that skips a revision needs to be backed up to
> the non SR release. Then upgraded from there to the SR release.
>
> The links are for CM 4.2 - 8.0, but the 4.2 - 4.3 links are relevant to
> CME.
>
> -ryan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Thu Mar 04 2010 - 18:47:24 ART