Re: Policing and Tc

Hi Garth,

It seems that the either the Packet based approach or the Scheduler based
approach could be used (based on the minimum). We are comparing the number
of tokens currently in the bucke (at time t): addition of what we have put
CIR * (t-t1) as well as what was already in the bucket at time t1. We
compare this value to the Bc. This comparison will lead to using either
packet or scheduled mode.

Best Regards,

Karim Jamali

On Tue, Mar 2, 2010 at 7:06 AM, Joe Astorino <jastorino_at_ipexpert.com> wrote:

> The answer as usual is "it depends". I would have to double check but I
> believe it uses the lower of the two values.
>
> It will be the minimum of either the Bc or the interval based token bucket
> based on the CIR and packet arrival time
>
>
>
>
> Regards,
>
> Joe Astorino CCIE #24347 (R&S)
> Sr. Technical Instructor - IPexpert
> Mailto: jastorino_at_ipexpert.com
> Telephone: +1.810.326.1444
> Live Assistance, Please visit: www.ipexpert.com/chat
> eFax: +1.810.454.0130
>
> IPexpert is a premier provider of Classroom and Self-Study Cisco CCNA (R&S,
> Voice & Security), CCNP, CCVP, CCSP and CCIE (R&S, Voice, Security & Service
> Provider) Certification Training with locations throughout the United
> States, Europe and Australia. Be sure to check out our online communities at
> www.ipexpert.com/communities and our public website at www.ipexpert.com
>
> -----Original Message-----
> From: Garth Bryden <hacked.the.planet.on.28.8k.dialup_at_gmail.com>
> Date: Tue, 2 Mar 2010 11:56:00
> To: karim jamali<karim.jamali_at_gmail.com>
> Cc: Cisco certification<ccielab_at_groupstudy.com>
> Subject: Re: Policing and Tc
>
> So what are you saying here that Policing uses a scheduler for single rate
> polcing but a packet based approach for dual rate policing?
>
> Cheers,
>
> Garth
>
> On Tue, Mar 2, 2010 at 1:20 AM, karim jamali <karim.jamali_at_gmail.com>
> wrote:
>
> > Hi Garth,
> >
> > This is from a previous email I sent to groupstudy and was a result of an
> > explanation of Petr Lapukhov and Joe Astrino. I am truly thankful to both
> > for sharing their knowledge.
> >
> > This is the email I sent which is sort of a summary:
> >
> > Dear Gents,
> >
> > I would like to thank Petr & Joe for such a wonderful knowledge sharing.
> > The main point of discussion as I understand is how the token bucket is
> > updated with policing:
> >
> > 1)Scheduler Approach which Petr mentioned relies on adding a number of
> > packets every scheduling interval (without having to do anything with the
> > way packets arrive and inter-arrival time).
> >
> > 2)Packet based approach: which relies on the inter-arrival time of
> packets
> >
> > Specifically, the token arrival rate is calculated as follows:
> > (time between packets<which is equal to t-t1>* policer rate)/8 bits per
> > byte Looking at the formulas that Joe used from Cisco's website:
> >
> > Tc(t) = min(CIR * (t-t1) + Tc(t1), Bc)
> > Tp(t) = min(PIR * (t-t1) + Tp(t1), Be)
> >
> > It seems that the either the Packet based approach or the Scheduler based
> > approach could be used (based on the minimum). We are comparing the
> number
> > of tokens currently in the bucke (at time t): addition of what we have
> put
> > CIR * (t-t1) as well as what was already in the bucket at time t1. We
> > compare this value to the Bc. This comparison will lead to using either
> > packet or scheduled mode.
> >
> > Once again,Petr & Joe can't thank you enough!
> >
> > Best Regards,
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
KJ
Blogs and organic groups at http://www.ccie.net