Re: building my own R&S lab

For MPLS you have to have 1841 Router and those are quite costly ...

Regards,
M. Faisal.

On Tue, Mar 2, 2010 at 7:08 AM, Brad Edgeworth <edgie512_at_gmail.com> wrote:

> 256MB DRAM, and then if you run the 12.8r RMON you can have 48MB Flash.
>
> The 2600xms are great for BB routers; but don't do MPLS. You may want to
> think about 3640's or 3725's for regular routers as they'll do MPLS and are
> faster...
>
> Do some more searching in the archives on pro's/con's
>
> On Mon, Mar 1, 2010 at 9:37 PM, Evan Weston <evan_weston_at_hotmail.com>
> wrote:
>
> > Look for yourself here: http://tools.cisco.com/ITDIT/CFN/
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > scuba diver
> > Sent: Tuesday, 2 March 2010 2:07 PM
> > To: Cisco certification
> > Subject: Re: building my own R&S lab
> >
> > What is the max memory that can go in the 2611xm, 2621xm, 2651xm? I am
> > going to buy 6 for my routers and then a couple for my relay network.
> > Scuba
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
M. Faisal.
Blogs and organic groups at http://www.ccie.net