RE: RIP V1 VLSM

Sarad,

If you are working on this from a vendors workbook ignore it and move on.
RIPv1 has been off of the test for years.

Regards,
 
Tyson Scott - CCIE #13513 R&S, Security, and SP
Technical Instructor - IPexpert, Inc.
Mailto: tscott_at_ipexpert.com
Telephone: +1.810.326.1444, ext. 208
Live Assistance, Please visit: www.ipexpert.com/chat
eFax: +1.810.454.0130

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
Sarad
Sent: Tuesday, February 16, 2010 11:40 AM
To: Cisco certification
Subject: RIP V1 VLSM

Hi Expert,

If I have the following scenario, that is two routers connected back to back
with a 10 range /16 ip & there are two loopbacks configured on each router
with the same class IPs. If I run RIPV1 on this. Will it advertise my
loopbacks to each other.

      R1
R2
S0 - 10.1.0.1/16 <---------------------------> S0 -10.1.0.2/16
L0 - 10.2.0.1/24 L0 - 10.3.0.1/24

Regards
Sara

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 16 2010 - 12:13:20 ART