Re: RIP V1 VLSM

yes you will be able to see /16 loopbacks.

On Tue, Feb 16, 2010 at 7:59 PM, Sarad <tosara_at_gmail.com> wrote:

> Hi Nadeem,
>
> Then will I be able to see 10.2.0.0 on R2 & 10.3.0.0 on R1?
>
> Sara
>
>
>
> On Tue, Feb 16, 2010 at 10:22 PM, Nadeem Rafi <nrafia_at_gmail.com> wrote:
>
>> you will not be able to see /24 as rip v1 will be sending /16 major
>> network only.
>>
>> HTH
>>
>> On Tue, Feb 16, 2010 at 7:39 PM, Sarad <tosara_at_gmail.com> wrote:
>>
>>> Hi Expert,
>>>
>>> If I have the following scenario, that is two routers connected back to
>>> back
>>> with a 10 range /16 ip & there are two loopbacks configured on each
>>> router
>>> with the same class IPs. If I run RIPV1 on this. Will it advertise my
>>> loopbacks to each other.
>>>
>>> R1
>>> R2
>>> S0 - 10.1.0.1/16 <---------------------------> S0 -10.1.0.2/16
>>> L0 <http://10.1.0.2/16L0> - 10.2.0.1/24
>>> L0 - 10.3.0.1/24
>>>
>>> Regards
>>> Sara
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Feb 16 2010 - 20:12:18 ART