Re: VSS Strange Problem

thank you man.

I will check it as I am now off site and didn't check the IOS version yet.

Will let you know about the update!

On Sun, Jan 31, 2010 at 3:41 PM, CCIE-Newbie <ccie_ka_at_gmx.de> wrote:

> Hi Karim,
>
> which version do you use ?
> I also installed and configure in the last 5 month about 6 VSS systems.
> I two of them I also got the same problem.
> So collegues tell me I should use the newest IOS version. I make an
> update to version 12.2(33)SXI3 and all works as expected.
>
> Bevor I had version 12.2(33)SXH5 running !
>
> Regards
> \
> Dennis
>
> Am Sonntag, den 31.01.2010, 10:08 +0300 schrieb karim jamali:
> > Dear Gents,
> >
> > I am new to VSS however I am facing a strange problem. I configured the 2
> > Core switches to be running in VSS mode. When using the show switch
> virtual
> > role both switches show with one of the switches as ACTIVE and the other
> as
> > Standby. However on the standby switch the fiber Gigabit module displays
> > ORANGE LED, thus no ports on the STANDBY switch are operating except the
> > TenGig ports which are used for the VSL Link. One more thing that makes
> the
> > problem look even more strange is that when I shutdown the primary switch
> > the STANDBY switch module goes active (GREEN) and operates properly. When
> > the primary switch comes UP again, both switches appear as ACTIVE ACTIVE.
> > The configuration I used is relatively sample:
> >
> > SW1
> >
> > switch virtual domain 10
> > switch 1 priority 200
> > switch 2 priority 100
> > switch 1
> > mac-address use virtual
> > exit
> >
> > int port-channel 1
> > switch virtual link 1
> > no sh
> > exit
> >
> > int range tengig5/4-5
> > channel-group 1 mode on
> > no sh
> > exit
> >
> > switch convert mode virtual
> >
> > SW2
> > switch virtual domain 10
> > switch 1 priority 200
> > switch 2 priority 100
> > switch 2
> > mac-address use virtual
> >
> > int port-channel 2
> > switch virtual link 2
> > no sh
> > exit
> >
> > int range tengig5/4-5
> > channel-group 2 mode on
> > no sh
> > exit
> >
> > switch convert mode virtual
> >
> >
> >
> >
> >
> >
> >
>
>

-- 
KJ
Blogs and organic groups at http://www.ccie.net