Re: VSS Strange Problem

Hi Karim,

which version do you use ?
I also installed and configure in the last 5 month about 6 VSS systems.
I two of them I also got the same problem.
So collegues tell me I should use the newest IOS version. I make an
update to version 12.2(33)SXI3 and all works as expected.

Bevor I had version 12.2(33)SXH5 running !

Regards
\
Dennis

Am Sonntag, den 31.01.2010, 10:08 +0300 schrieb karim jamali:
> Dear Gents,
>
> I am new to VSS however I am facing a strange problem. I configured the 2
> Core switches to be running in VSS mode. When using the show switch virtual
> role both switches show with one of the switches as ACTIVE and the other as
> Standby. However on the standby switch the fiber Gigabit module displays
> ORANGE LED, thus no ports on the STANDBY switch are operating except the
> TenGig ports which are used for the VSL Link. One more thing that makes the
> problem look even more strange is that when I shutdown the primary switch
> the STANDBY switch module goes active (GREEN) and operates properly. When
> the primary switch comes UP again, both switches appear as ACTIVE ACTIVE.
> The configuration I used is relatively sample:
>
> SW1
>
> switch virtual domain 10
> switch 1 priority 200
> switch 2 priority 100
> switch 1
> mac-address use virtual
> exit
>
> int port-channel 1
> switch virtual link 1
> no sh
> exit
>
> int range tengig5/4-5
> channel-group 1 mode on
> no sh
> exit
>
> switch convert mode virtual
>
> SW2
> switch virtual domain 10
> switch 1 priority 200
> switch 2 priority 100
> switch 2
> mac-address use virtual
>
> int port-channel 2
> switch virtual link 2
> no sh
> exit
>
> int range tengig5/4-5
> channel-group 2 mode on
> no sh
> exit
>
> switch convert mode virtual

Blogs and organic groups at http://www.ccie.net
Received on Sun Jan 31 2010 - 13:41:16 ART