Re: VSS Strange Problem

Hi,

I wonder what version you are using also ...

On Sun, Jan 31, 2010 at 8:08 AM, karim jamali <karim.jamali_at_gmail.com> wrote:
> Dear Gents,
>
> I am new to VSS however I am facing a strange problem. I configured the 2
> Core switches to be running in VSS mode. When using the show switch virtual
> role both switches show with one of the switches as ACTIVE and the other as
> Standby. However on the standby switch the fiber Gigabit module displays
> ORANGE LED, thus no ports on the STANDBY switch are operating except the
> TenGig ports which are used for the VSL Link. One more thing that makes the
> problem look even more strange is that when I shutdown the primary switch
> the STANDBY switch module goes active (GREEN) and operates properly. When
> the primary switch comes UP again, both switches appear as ACTIVE ACTIVE.
> The configuration I used is relatively sample:
>
> SW1
>
> switch virtual domain 10
> switch 1 priority 200
> switch 2 priority 100
> switch 1
> mac-address use virtual
> exit
>
> int port-channel 1
> switch virtual link 1
> no sh
> exit
>
> int range tengig5/4-5
> channel-group 1 mode on
> no sh
> exit
>
> switch convert mode virtual
>
> SW2
> switch virtual domain 10
> switch 1 priority 200
> switch 2 priority 100
> switch 2
> mac-address use virtual
>
> int port-channel 2
> switch virtual link 2
> no sh
> exit
>
> int range tengig5/4-5
> channel-group 2 mode on
> no sh
> exit
>
> switch convert mode virtual
>
>
>
>
>
>
>
> --
> KJ
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Regards,
Iwan Hoogendoorn
CCIE #13084 (R&S / Security / SP)
Sr. Support Engineer  IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net