CCIE RS Test

Guys, I took the CCIE RS yesterday, and I got my results 3 hours after the
test. I have failed but I passed core, and troubleshooting section.

Little feedback from the test:

New Test is not that difficult, the hardest part I would say is time. After 30
min of core , then 2 hours of troubleshooting I think 5 hours is not enough to
complete the lab. I completed lab skipping 4 questions, and at the end did not
have time to go back and revisit these.

Another thing that has changed is documentation access. I missed old days of
being able to browse the univercd website to look for solutions or pointers.
New documentation sucks!!!!!!!! It is very slow, it takes a minute to open up
a page, once the page opens you getting a message 90% of the time that you
have no access to this section. Documentation was not useful at all. I mean
they locked it down so you can't find anything. After looking for some
documentation on netflow and PPP, 30 minutes and I got nowhere. My suggestion
would be do not depend on documentation anymore, forget about it.

Troubleshooting section looks difficult at first with amount of routers you
have to troubleshoot, but it is pretty straight forwards. My incidents I had
to troubleshoot where not depended to each other. I was able to complete all
of the incidents and still had 15 minutes left to complete this sections.

Other than that it was very good experience to work with version 4.0. I think
end of march/beg of april I will be ready to take it again.

If you have any questions please let me know.

Marcin Zgola
Internetwork Lead
CCIE #18676
Netrix, LLC
http://www.netrixllc.com
Ph. 847-964-5300
Fax.: 847-964-5350

Blogs and organic groups at http://www.ccie.net
Received on Thu Jan 28 2010 - 09:38:02 ART