Re: PPPoE config

Yeah, everything else should be the same. PPPoE is the "Broadband Access
Aggregation and DSL Configuration Guide"

http://www.cisco.com/en/US/docs/ios/bbdsl/configuration/guide/12_4t/bba_12_4t_book.html

On Wed, Dec 23, 2009 at 3:04 PM, Divin Mathew John <divinjohn_at_gmail.com>wrote:

> Everything else stays the same rt? ie. the same config on the physical
> interface can be done on the sub interface.
>
> Where can i find a sample config of this in the DOC Cd?
>
> On Thu, Dec 24, 2009 at 3:33 AM, Divin Mathew John <divinjohn_at_gmail.com>
> wrote:
> > Oh k.! i was trying it on a 12.4 or 12.4T <15..!
> >
> > On Thu, Dec 24, 2009 at 3:25 AM, Bryan Bartik <bbartik_at_ipexpert.com>
> wrote:
> >> Divin,
> >>
> >> Good question, this may be a limitation of the IOS you are using. I know
> at
> >> least it is available in 12.4(15)T9
> >>
> >> R1(config)#int f0/1.1
> >> R1(config-subif)#pppoe-client ?
> >> dial-pool-number dialer pool keyword
> >>
> >> R1(config-subif)#pppoe-client dial-pool-number ?
> >> <1-255> Dialer pool number
> >>
> >>
> >> R1#sho ver | inc IOS
> >> Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version
> >> 12.4(15)T9, RELEASE SOFTWARE (fc5)
> >>
> >>
> >> On Wed, Dec 23, 2009 at 11:15 AM, Divin Mathew John <
> divinjohn_at_gmail.com>
> >> wrote:
> >>>
> >>> R1(fa0/0) ----- fa(0/0)R2
> >>> Now R1(config)#username R2 password pppoe-lab
> >>>
> >>> R1(config)#int f0/0
> >>>
> >>> R1(config-if)#pppoe-client dial-pool-number 1
> >>>
> >>> R1(config)#int dialer 1
> >>>
> >>> R1(config-if)#dialer-group 1
> >>>
> >>> R1(config-if)#dialer pool 1
> >>>
> >>> R1(config-if)#ppp auth?
> >>>
> >>> % Unrecognized command
> >>>
> >>> R1(config-if)#encapsulation ppp
> >>>
> >>> R1(config-if)#ppp authen chap
> >>>
> >>> R1(config-if)#ip address dhcp
> >>>
> >>> R2(config)#username R1 password pppoe-lab
> >>>
> >>> R2(config)#ip dhcp pool R1
> >>>
> >>> R2(dhcp-config)#network 192.168.1.0 /24
> >>>
> >>> R2(dhcp-config)#exit
> >>>
> >>> R2(config)#interface virtual-template 1
> >>>
> >>> R2(config-if)#ip address 192.168.1.2 255.255.255.0
> >>>
> >>> R2(config-if)#encap ppp
> >>>
> >>> R2(config-if)#ppp authentication chap
> >>>
> >>> R2(config-if)#exit
> >>>
> >>> R2(config)#bba-group pppoe global
> >>>
> >>> R2(config-bba-group)#virtual-template 1
> >>>
> >>> R2(config-bba-group)#int f0/0
> >>>
> >>> R2(config-if)#pppoe enable group global
> >>>
> >>> This config is from
> >>> http://blog.ipexpert.com/2009/08/17/pppoe-a-closer-look/.
> >>>
> >>> say i am using subinterfaces and doing dot1q tagging on the routers.
> >>> How do i go abt the config. I cant find the "pppoe-client
> >>> dial-pool-number 1" under the sub interface which i use to tag and
> >>> send the frames.!
> >>>
> >>> Wht do i do?
> >>>
> >>> --
> >>>
> >>> Sent from Karnataka, India
> >>> George Carlin - "As a matter of principle, I never attend the first
> >>> annual anything."
> >>>
> >>>
> >>> Blogs and organic groups at http://www.ccie.net
> >>>
> >>> _______________________________________________________________________
> >>> Subscription information may be found at:
> >>> http://www.groupstudy.com/list/CCIELab.html
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>>
> >>
> >>
> >>
> >> --
> >> Bryan Bartik
> >> CCIE #23707 (R&S, SP), CCNP
> >> Sr. Support Engineer - IPexpert, Inc.
> >> URL: http://www.IPexpert.com
> >>
> >
> >
> >
> > --
> >
> >
> > Fran Lebowitz - "I never took hallucinogenic drugs because I never
> > wanted my consciousness expanded one unnec... -
> > http://www.quotationspage.com/quote/23635.html
> >
>
>
>
> --
>
> Sent from Karnataka, India
> David Letterman - "I'm just trying to make a smudge on the collective
> unconscious." - http://www.quotationspage.com/quote/938.html
>

-- 
Bryan Bartik
CCIE #23707 (R&S, SP), CCNP
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
Blogs and organic groups at http://www.ccie.net