Re: PPPoE config

Everything else stays the same rt? ie. the same config on the physical
interface can be done on the sub interface.

Where can i find a sample config of this in the DOC Cd?

On Thu, Dec 24, 2009 at 3:33 AM, Divin Mathew John <divinjohn_at_gmail.com> wrote:
> Oh k.! i was trying it on a 12.4 or 12.4T <15..!
>
> On Thu, Dec 24, 2009 at 3:25 AM, Bryan Bartik <bbartik_at_ipexpert.com> wrote:
>> Divin,
>>
>> Good question, this may be a limitation of the IOS you are using. I know at
>> least it is available in 12.4(15)T9
>>
>> R1(config)#int f0/1.1
>> R1(config-subif)#pppoe-client ?
>> dial-pool-number dialer pool keyword
>>
>> R1(config-subif)#pppoe-client dial-pool-number ?
>> <1-255> Dialer pool number
>>
>>
>> R1#sho ver | inc IOS
>> Cisco IOS Software, 3700 Software (C3725-ADVENTERPRISEK9-M), Version
>> 12.4(15)T9, RELEASE SOFTWARE (fc5)
>>
>>
>> On Wed, Dec 23, 2009 at 11:15 AM, Divin Mathew John <divinjohn_at_gmail.com>
>> wrote:
>>>
>>> R1(fa0/0) ----- fa(0/0)R2
>>> Now R1(config)#username R2 password pppoe-lab
>>>
>>> R1(config)#int f0/0
>>>
>>> R1(config-if)#pppoe-client dial-pool-number 1
>>>
>>> R1(config)#int dialer 1
>>>
>>> R1(config-if)#dialer-group 1
>>>
>>> R1(config-if)#dialer pool 1
>>>
>>> R1(config-if)#ppp auth?
>>>
>>> % Unrecognized command
>>>
>>> R1(config-if)#encapsulation ppp
>>>
>>> R1(config-if)#ppp authen chap
>>>
>>> R1(config-if)#ip address dhcp
>>>
>>> R2(config)#username R1 password pppoe-lab
>>>
>>> R2(config)#ip dhcp pool R1
>>>
>>> R2(dhcp-config)#network 192.168.1.0 /24
>>>
>>> R2(dhcp-config)#exit
>>>
>>> R2(config)#interface virtual-template 1
>>>
>>> R2(config-if)#ip address 192.168.1.2 255.255.255.0
>>>
>>> R2(config-if)#encap ppp
>>>
>>> R2(config-if)#ppp authentication chap
>>>
>>> R2(config-if)#exit
>>>
>>> R2(config)#bba-group pppoe global
>>>
>>> R2(config-bba-group)#virtual-template 1
>>>
>>> R2(config-bba-group)#int f0/0
>>>
>>> R2(config-if)#pppoe enable group global
>>>
>>> This config is from
>>> http://blog.ipexpert.com/2009/08/17/pppoe-a-closer-look/.
>>>
>>> say i am using subinterfaces and doing dot1q tagging on the routers.
>>> How do i go abt the config. I cant find the "pppoe-client
>>> dial-pool-number 1" under the sub interface which i use to tag and
>>> send the frames.!
>>>
>>> Wht do i do?
>>>
>>> --
>>>
>>> Sent from Karnataka, India
>>> George Carlin - "As a matter of principle, I never attend the first
>>> annual anything."
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html
>>>
>>>
>>>
>>>
>>>
>>>
>>>
>>
>>
>>
>> --
>> Bryan Bartik
>> CCIE #23707 (R&S, SP), CCNP
>> Sr. Support Engineer - IPexpert, Inc.
>> URL: http://www.IPexpert.com
>>
>
>
>
> --
>
>
> Fran Lebowitz - "I never took hallucinogenic drugs because I never
> wanted my consciousness expanded one unnec... -
> http://www.quotationspage.com/quote/23635.html
>

-- 
Sent from Karnataka, India
David Letterman  - "I'm just trying to make a smudge on the collective
unconscious." - http://www.quotationspage.com/quote/938.html
Blogs and organic groups at http://www.ccie.net