Re: QoS on 7609

Hello,
To answer your question it depends on code, line cards, and supervisor
engine. If you are running later SRC/SRD code and sup720-3XLs you will find
qos command similar to ISR routers (2800s). If you look through the below
links you will see the changes as code and mods are changed:

http://www.cisco.com/en/US/docs/routers/7600/ios/12.1E/command/reference/p1.html#wp1047068
http://www.cisco.com/en/US/docs/routers/7600/ios/12.2SR/configuration/guide/qos.html
http://www.cisco.com/en/US/docs/routers/7600/install_config/ES20_config_guide/SRD/bald_qos.html#wp1346781
http://www.cisco.com/en/US/technologies/tk543/tk545/technologies_white_paper09186a0080123415_ps6558_Products_White_Paper.html
Bottom line: Check on the code version, mods, and supervisor for which you
require qos as it is specific to the combination you have.

Steve Lyons

On Mon, Sep 7, 2009 at 12:12 PM, Yusuf, Daniel (NSN - MA/Casablanca) <
daniel.yusuf_at_nsn.com> wrote:

> Hi Group
>
> I am implementing output policy on interface Gigabitethernet on
> Supervisor720 engine
>
> And got the result, priority command is not supported in output
> direction for this interface, configuration failed.
>
> Having googling around, some are saying that LLQ is not supported on
> such interfaces.
> Is that true ?
>
> Thanks in advance for any response.
>
> Br,
>
> -daniel
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed Sep 09 2009 - 20:20:01 ART