Re: Auto RP on two router in a multicast network

I believe you are correct ...that's why you have to define the groups for
each one

http://www.cisco.com/en/US/partner/tech/tk828/technologies_tech_note09186a0080094821.shtml

----- Original Message -----
From: "CC IE" <cciestriker_at_gmail.com>
To: <ccielab_at_groupstudy.com>
Sent: Monday, August 10, 2009 9:45 PM
Subject: Auto RP on two router in a multicast network

> hi
>
> if two multicast router in a multicast network are configured for auto RP
> for same Mulicast group. who will become the RP for the group
> if both routers have same config onlu loop0 ip is differecnt.
>
> ip pim send-rp-announce Loopback0 scope 16 group-list 1
>
> ip pim send-rp-discovery Loopback1 scope 16
>
> access-list 1 permit host 224.20.20.20
>
>
> is it based on the highest loopback ip. or am i missing some thing
>
>
> regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 10 2009 - 21:54:23 ART