Re: Auto RP on two router in a multicast network

The mapping agent will select the highest IP and use this to notify
multicast enabled routers on the network which RP to use for whichever
group or groups are configured.

On Mon, Aug 10, 2009 at 7:45 PM, CC IE<cciestriker_at_gmail.com> wrote:
> hi
>
> if two multicast router in a multicast network are configured for auto RP
> for same Mulicast group. who will become the RP for the group
> if both routers have same config onlu loop0 ip is differecnt.
>
> ip pim send-rp-announce Loopback0 scope 16 group-list 1
>
> ip pim send-rp-discovery Loopback1 scope 16
>
> access-list 1 permit host 224.20.20.20
>
>
> is it based on the highest loopback ip. or am i missing some thing
>
>
> regards
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Mon Aug 10 2009 - 20:02:58 ART