Re: QOS Signalling

Thank you Mohammed and what about 1)Configuring COPS for RSVP and 2)
Configuring Subnetwork Bandwidth Manager.Thanks for the suggestion.

Regards
Anantha Subramanian Natarajan

On Sun, Aug 9, 2009 at 1:02 PM, Mohamed El Henawy <m.henawy_at_link.net> wrote:

> Just the ATM as there is no ATM on the LAB
>
> http://blog.ine.com//2008/11/29/rs-30-expanded-study-blueprint/
>
>
>
> ----- Original Message ----- From: "Anantha Subramanian Natarajan" <
> anantha.natarajan_at_gravitant.com>
> To: "Anthony Sequeira" <asequeira_at_ine.com>; "Cisco certification" <
> ccielab_at_groupstudy.com>
> Sent: Sunday, August 09, 2009 8:53 PM
> Subject: Re: QOS Signalling
>
>
> Hi Anthony,
>>
>> Great and thanks for the response.I was performing Vol II ver5.0 Lab3 and
>> one of the task had requirement based on RSVP and so thought that the RSVP
>> is in the 3.x R/S lab.So do you think the whole RSVP topic is not there or
>> just RSVP-ATM.Once again thanks for response.
>>
>> Regards
>> Anantha Subramanian Natarajan
>>
>> On Sun, Aug 9, 2009 at 12:36 PM, Anthony Sequeira <asequeira_at_ine.com>
>> wrote:
>>
>> What document are you looking at?
>>>
>>> I think most of this is out of scope for the current 3.X R/S CCIE lab
>>> blueprint. Configuring RSVP-ATM QOS Internetworking for sure is!
>>>
>>> Warmest Regards,
>>>
>>> Anthony J. Sequeira, CCIE #15626
>>> http://www.INE.com <http://www.ine.com/> <http://www.ine.com/>
>>>
>>>
>>> Test your Core Knowledge today!
>>> Q: What LSA type is used by a router to advertise a prefix within its
>>> local
>>> area only?
>>> A: LSA Type 1
>>> More Info: http://en.wikipedia.org/wiki/Link-state_advertisement
>>>
>>>
>>>
>>> On Aug 9, 2009, at 9:33 AM, Anantha Subramanian Natarajan wrote:
>>>
>>> Hi All,
>>>
>>>>
>>>> Under QOS signalling,I am seeing the below topics and wondering whether
>>>> I
>>>> need to give attention to Configuring RSVP-ATM QOS Internetworking among
>>>> the
>>>> below.Planning to go through the others but also would like to have your
>>>> comment on how extensive on Configuring COPS for RSVP and Configuring
>>>> Subnetwork Bandwidth Manager.Any suggestion really appreciated.
>>>>
>>>> Signalling
>>>>
>>>> 1) Configuring RSVP
>>>> 2) Configuring RSVP support for LLQ
>>>> 3) Configuring RSVP support for frame relay
>>>> 4) Configuring RSVP-ATM QOS Internetworking
>>>> 5) Configuring COPS for RSVP
>>>> 6) Configuring Subnetwork Bandwidth Manager
>>>>
>>>> Thanks
>>>>
>>>> Regards
>>>> Anantha Subramanian Natarajan
>>>>
>>>>
>>>> Blogs and organic groups at http://www.ccie.net
>>>>
>>>> _______________________________________________________________________
>>>> Subscription information may be found at:
>>>> http://www.groupstudy.com/list/CCIELab.html
>>>>
>>>
>>
>> Blogs and organic groups at http://www.ccie.net
>>
>> _______________________________________________________________________
>> Subscription information may be found at:
>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 09 2009 - 13:07:53 ART