Re: QOS Signalling

Very basic RSVP is in scope for the Core Knowledge Section as well as
the configuration portion of the 3.x R/S CCIE lab exam.

I would study it last however. Well, second to last, place it in your
study routine before the legacy QoS mechanisms like Custom Queuing. :-)

Warmest Regards,

Anthony J. Sequeira, CCIE #15626
http://www.INE.com

Test your Core Knowledge today!
Q: How will a user be authenticated if the RADIUS servers fail to
respond with this configuration? aaa authentication enable default
group radius enable
A: enable password
More Info: http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfathen.html#wp1000906

On Aug 9, 2009, at 1:53 PM, Anantha Subramanian Natarajan wrote:

> Hi Anthony,
>
> Great and thanks for the response.I was performing Vol II ver5.0
> Lab3 and one of the task had requirement based on RSVP and so
> thought that the RSVP is in the 3.x R/S lab.So do you think the
> whole RSVP topic is not there or just RSVP-ATM.Once again thanks for
> response.
>
> Regards
> Anantha Subramanian Natarajan
>
> On Sun, Aug 9, 2009 at 12:36 PM, Anthony Sequeira
> <asequeira_at_ine.com> wrote:
> What document are you looking at?
>
> I think most of this is out of scope for the current 3.X R/S CCIE
> lab blueprint. Configuring RSVP-ATM QOS Internetworking for sure is!
>
> Warmest Regards,
>
> Anthony J. Sequeira, CCIE #15626
> http://www.INE.com
>
> Test your Core Knowledge today!
> Q: What LSA type is used by a router to advertise a prefix within
> its local area only?
> A: LSA Type 1
> More Info: http://en.wikipedia.org/wiki/Link-state_advertisement
>
>
>
> On Aug 9, 2009, at 9:33 AM, Anantha Subramanian Natarajan wrote:
>
> Hi All,
>
> Under QOS signalling,I am seeing the below topics and wondering
> whether I
> need to give attention to Configuring RSVP-ATM QOS Internetworking
> among the
> below.Planning to go through the others but also would like to have
> your
> comment on how extensive on Configuring COPS for RSVP and Configuring
> Subnetwork Bandwidth Manager.Any suggestion really appreciated.
>
> Signalling
>
> 1) Configuring RSVP
> 2) Configuring RSVP support for LLQ
> 3) Configuring RSVP support for frame relay
> 4) Configuring RSVP-ATM QOS Internetworking
> 5) Configuring COPS for RSVP
> 6) Configuring Subnetwork Bandwidth Manager
>
> Thanks
>
> Regards
> Anantha Subramanian Natarajan
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 09 2009 - 14:03:35 ART