Re: QOS Signalling

Great Suggestion Anthony and thank you very much

Regards
Anantha Subramanian Natarajan

On Sun, Aug 9, 2009 at 1:03 PM, Anthony Sequeira <asequeira_at_ine.com> wrote:

> Very basic RSVP is in scope for the Core Knowledge Section as well as the
> configuration portion of the 3.x R/S CCIE lab exam.
> I would study it last however. Well, second to last, place it in your study
> routine before the legacy QoS mechanisms like Custom Queuing. :-)
>
> Warmest Regards,
>
> Anthony J. Sequeira, CCIE #15626
> http://www.INE.com <http://www.ine.com/>
>
> Test your Core Knowledge today!
> Q: How will a user be authenticated if the RADIUS servers fail to respond
> with this configuration? aaa authentication enable default group radius
> enable
> A: enable password
> More Info:
> http://www.cisco.com/en/US/docs/ios/12_2/security/configuration/guide/scfathen.html#wp1000906
>
>
> On Aug 9, 2009, at 1:53 PM, Anantha Subramanian Natarajan wrote:
>
> Hi Anthony,
>
> Great and thanks for the response.I was performing Vol II ver5.0 Lab3 and
> one of the task had requirement based on RSVP and so thought that the RSVP
> is in the 3.x R/S lab.So do you think the whole RSVP topic is not there or
> just RSVP-ATM.Once again thanks for response.
>
> Regards
> Anantha Subramanian Natarajan
>
> On Sun, Aug 9, 2009 at 12:36 PM, Anthony Sequeira <asequeira_at_ine.com>wrote:
>
>> What document are you looking at?
>>
>> I think most of this is out of scope for the current 3.X R/S CCIE lab
>> blueprint. Configuring RSVP-ATM QOS Internetworking for sure is!
>>
>> Warmest Regards,
>>
>> Anthony J. Sequeira, CCIE #15626
>> http://www.INE.com <http://www.ine.com/>
>>
>> Test your Core Knowledge today!
>> Q: What LSA type is used by a router to advertise a prefix within its
>> local area only?
>> A: LSA Type 1
>> More Info: http://en.wikipedia.org/wiki/Link-state_advertisement
>>
>>
>>
>> On Aug 9, 2009, at 9:33 AM, Anantha Subramanian Natarajan wrote:
>>
>> Hi All,
>>>
>>> Under QOS signalling,I am seeing the below topics and wondering whether
>>> I
>>> need to give attention to Configuring RSVP-ATM QOS Internetworking among
>>> the
>>> below.Planning to go through the others but also would like to have your
>>> comment on how extensive on Configuring COPS for RSVP and Configuring
>>> Subnetwork Bandwidth Manager.Any suggestion really appreciated.
>>>
>>> Signalling
>>>
>>> 1) Configuring RSVP
>>> 2) Configuring RSVP support for LLQ
>>> 3) Configuring RSVP support for frame relay
>>> 4) Configuring RSVP-ATM QOS Internetworking
>>> 5) Configuring COPS for RSVP
>>> 6) Configuring Subnetwork Bandwidth Manager
>>>
>>> Thanks
>>>
>>> Regards
>>> Anantha Subramanian Natarajan
>>>
>>>
>>> Blogs and organic groups at http://www.ccie.net
>>>
>>> _______________________________________________________________________
>>> Subscription information may be found at:
>>> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Sun Aug 09 2009 - 13:08:47 ART