Re: Cannot use "Distribute-list out" on OSPF Routing Context

On Tuesday/Wednesday we will be releasing our Class On Demand series and the
first part of these series is about Filtering in OSPF, i am sure it will be
beneficial to you and others. The cost is ONLY $50. Very intense.

On Fri, Aug 7, 2009 at 10:15 AM, Warakorn Sae-Tang <kornrono_at_gmail.com>wrote:

> Clear!!
>
> Thank you "Dan" and Group Study very much
>
> Best Regards,
> Korn.
>
>
> On Fri, Aug 7, 2009 at 1:39 PM, Danshtr <danshtr_at_gmail.com> wrote:
>
> > distribute list out was never supported in OSPF.
> >
> > You can't filter LSAs inside an area, only at ABRs, ASBRs.
> >
> >
> > Best regards,
> > Dan
> >
> >
> >
> > On Fri, Aug 7, 2009 at 8:35 AM, Warakorn Sae-Tang <kornrono_at_gmail.com
> >wrote:
> >
> >> Dear all,
> >>
> >> First of all, I want to test "Sham-Link" feature. After finish I want to
> >> filter "O E2" of PE Loopback Interface before sending update to CE
> Router.
> >> But I've found this problem. Now, I test MPLS-VPN lab with Cisco 7600
> >> router
> >> (IOS Version 12.2(33)SRC3).
> >>
> >> this is my sample config on OSPF vrf "12"
> >>
> >> !
> >> router ospf 1 vrf 12
> >> log-adjacency-changes
> >> redistribute bgp 65001 subnets
> >> network 172.16.111.1 0.0.0.0 area 0
> >> !
> >>
> >> I try to use "distribute-list out" command on OSPF, but it show like
> this:
> >>
> >> (config-router)#distribute-list 1 out gigabitEthernet 5/2
> >> % Interface not allowed with OUT for OSPF
> >> (config-router)#
> >>
> >> After that I try with "distribute-list in" command. It's ok.
> >>
> >> (config-router)#distribute-list 1 in gigabitEthernet 5/2
> >>
> >>
> >> And it success on other Routing Context such as RIPv2 and BGP
> >>
> >> RIPv2
> >> !
> >> router rip
> >> version 2
> >> no auto-summary
> >> !
> >> address-family ipv4 vrf 12
> >> redistribute bgp 65001
> >> network 172.16.0.0
> >> distribute-list 1 out GigabitEthernet5/2
> >> no auto-summary
> >> exit-address-family
> >> !
> >>
> >> BGP
> >> !
> >> router bgp 65001
> >> !
> >> address-family ipv4 vrf 12
> >> no synchronization
> >> network 111.111.111.111 mask 255.255.255.255
> >> distribute-list 1 out GigabitEthernet5/2
> >> exit-address-family
> >> !
> >>
> >> I don't know this is IOS problem or my missing concept of
> distribute-list
> >> "out" on OSPF-VRF.
> >>
> >> Please suggest me.
> >>
> >> Best Regards,
> >> Warakorn Sae-Tang
> >>
> >>
> >> Blogs and organic groups at http://www.ccie.net
> >>
> >> _______________________________________________________________________
> >> Subscription information may be found at:
> >> http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Narbik Kocharians
CCSI#30832, CCIE# 12410 (R&S, SP, Security)
www.MicronicsTraining.com
Sr. Technical Instructor
Blogs and organic groups at http://www.ccie.net