Re: Cannot use "Distribute-list out" on OSPF Routing Context

distribute list out was never supported in OSPF.

You can't filter LSAs inside an area, only at ABRs, ASBRs.

Best regards,
Dan

On Fri, Aug 7, 2009 at 8:35 AM, Warakorn Sae-Tang <kornrono_at_gmail.com>wrote:

> Dear all,
>
> First of all, I want to test "Sham-Link" feature. After finish I want to
> filter "O E2" of PE Loopback Interface before sending update to CE Router.
> But I've found this problem. Now, I test MPLS-VPN lab with Cisco 7600
> router
> (IOS Version 12.2(33)SRC3).
>
> this is my sample config on OSPF vrf "12"
>
> !
> router ospf 1 vrf 12
> log-adjacency-changes
> redistribute bgp 65001 subnets
> network 172.16.111.1 0.0.0.0 area 0
> !
>
> I try to use "distribute-list out" command on OSPF, but it show like this:
>
> (config-router)#distribute-list 1 out gigabitEthernet 5/2
> % Interface not allowed with OUT for OSPF
> (config-router)#
>
> After that I try with "distribute-list in" command. It's ok.
>
> (config-router)#distribute-list 1 in gigabitEthernet 5/2
>
>
> And it success on other Routing Context such as RIPv2 and BGP
>
> RIPv2
> !
> router rip
> version 2
> no auto-summary
> !
> address-family ipv4 vrf 12
> redistribute bgp 65001
> network 172.16.0.0
> distribute-list 1 out GigabitEthernet5/2
> no auto-summary
> exit-address-family
> !
>
> BGP
> !
> router bgp 65001
> !
> address-family ipv4 vrf 12
> no synchronization
> network 111.111.111.111 mask 255.255.255.255
> distribute-list 1 out GigabitEthernet5/2
> exit-address-family
> !
>
> I don't know this is IOS problem or my missing concept of distribute-list
> "out" on OSPF-VRF.
>
> Please suggest me.
>
> Best Regards,
> Warakorn Sae-Tang
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Fri Aug 07 2009 - 08:39:52 ART