Port Channel not coming up

Hello,

Any suggestion as far as bringing this port channel up?
The port channel interface is up but the other member of the channel is
down and doesn't show as a member of that channel.

sw1
interface GigabitEthernet1/5
GigabitEthernet1/5 is up, line protocol is up (connected)
 description 1sharebc-sp01a
 switchport
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 601
 switchport trunk allowed vlan none
 switchport mode trunk
 no ip address
 no snmp trap link-status
 channel-group 3 mode desirable non-silent
!

interface GigabitEthernet4/15
GigabitEthernet4/15 is up, line protocol is down (notconnect)
 description 1sharebc-sp01a
 switchport
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 601
 switchport trunk allowed vlan none
 switchport mode trunk
 no ip address
 no snmp trap link-status
 channel-group 3 mode desirable non-silent
!

interface Port-channel3
Port-channel3 is up, line protocol is up (connected)
 description 1sharebc-sp01a
Members in this channel: Gi1/5
 switchport
 switchport trunk encapsulation dot1q
 switchport trunk native vlan 601
 switchport trunk allowed vlan none
 switchport mode trunk
 no ip address

==========================================================

sw2
set vlan 601 9/5-6
clear trunk 9/5 1-4094
set trunk 9/5 on dot1q
clear trunk 9/6 1-4094
set trunk 9/6 on dot1q
set spantree portfast 9/5-8 disable
set port channel 9/5-6 mode desirable non-silent

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 28 2009 - 12:01:51 ART