Re: Frame Relay : expecting static .. why dynamic.

I'm actually having the same problem. There is another command "no arp
frame-relay" that is supposed to disable frame-relay replies which is not
covered under the first command (sometimes I swear IOS was written by
ninja monkeys) but that didn't work either.

Frame Relay : expecting static .. why dynamic.

Taufik Kurniawan
to:
Cisco certification
07/14/09 10:47 AM

Sent by:
nobody_at_groupstudy.com
Please respond to Taufik Kurniawan

Hi All,

FR newbie questions :

Playing around with FR.

R1 :

int s0/0.1020 mul
ip add 10.0.0.1 255.255.255.252
frame inter-dlci 102

R2 :

int s0/0
ip add 10.0.0.2 255.255.255.252
encap frame
frame inter-dlci 201
no frame inv

r1#sh frame map
Serial0/0.1020 (up): ip 10.0.0.2 dlci 102(0x66,0x1860), dynamic,
              broadcast,
              CISCO, status defined, active

r2#sh frame map
Serial0/0 (up): ip 10.0.0.1 dlci 201(0xC9,0x3090), dynamic,
              broadcast,
              CISCO, status defined, active

why did i get dynamic in R2 ?

thanks for enlightment ...

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 14 2009 - 11:04:19 ART