Re: Frame Relay : expecting static .. why dynamic.

Why were you expecting static? You need to use the "frame-relay map"
command if you want a static mapping. The "frame-relay interface-dlci"
command simply says "this dlci goes here" and has nothing to do with
static mapping.

HTH,

*Scott Morris*, CCIE/x4/ (R&S/ISP-Dial/Security/Service Provider) #4713,

JNCIE-M #153, JNCIS-ER, CISSP, et al.

JNCI-M, JNCI-ER

evil_at_ine.com

Internetwork Expert, Inc.

http://www.InternetworkExpert.com

Toll Free: 877-224-8987

Outside US: 775-826-4344

Knowledge is power.

Power corrupts.

Study hard and be Eeeeviiiil......

Taufik Kurniawan wrote:
> Hi All,
>
> FR newbie questions :
>
> Playing around with FR.
>
> R1 :
>
> int s0/0.1020 mul
> ip add 10.0.0.1 255.255.255.252
> frame inter-dlci 102
>
>
> R2 :
>
> int s0/0
> ip add 10.0.0.2 255.255.255.252
> encap frame
> frame inter-dlci 201
> no frame inv
>
>
> r1#sh frame map
> Serial0/0.1020 (up): ip 10.0.0.2 dlci 102(0x66,0x1860), dynamic,
> broadcast,
> CISCO, status defined, active
>
>
> r2#sh frame map
> Serial0/0 (up): ip 10.0.0.1 dlci 201(0xC9,0x3090), dynamic,
> broadcast,
> CISCO, status defined, active
>
> why did i get dynamic in R2 ?
>
> thanks for enlightment ...
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 14 2009 - 10:52:13 ART