Re: Frame Relay : expecting static .. why dynamic.

I think I misread your question. I believe the frame-relay interface dlci
command uses inverse arp anyway to the dlci to an actual IP address. Try
using frame relay map ip even on point-to-point interfaces. My problem is
that when there is another DLCI on my physical interface it still uses
in-arp even though I have disabled it.

Frame Relay : expecting static .. why dynamic.

Taufik Kurniawan
to:
Cisco certification
07/14/09 10:47 AM

Sent by:
nobody_at_groupstudy.com
Please respond to Taufik Kurniawan

Hi All,

FR newbie questions :

Playing around with FR.

R1 :

int s0/0.1020 mul
ip add 10.0.0.1 255.255.255.252
frame inter-dlci 102

R2 :

int s0/0
ip add 10.0.0.2 255.255.255.252
encap frame
frame inter-dlci 201
no frame inv

r1#sh frame map
Serial0/0.1020 (up): ip 10.0.0.2 dlci 102(0x66,0x1860), dynamic,
              broadcast,
              CISCO, status defined, active

r2#sh frame map
Serial0/0 (up): ip 10.0.0.1 dlci 201(0xC9,0x3090), dynamic,
              broadcast,
              CISCO, status defined, active

why did i get dynamic in R2 ?

thanks for enlightment ...

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 14 2009 - 11:08:22 ART