Re: leased line with G703 module using router 2851 and 2801

Hi all,
another questions, for example i need to connecting office B to A, also ofice
C to A, and office D to A. office A is a central office. do wee need 3 router
at office A or we just need 1 router at office A if we'll using leased line.
Today we using 1 router for 3 branch office with MPLS.

thanks for any helps.

  ----- Original Message -----
  From: Radioactive Frog
  To: erwin wijaya
  Cc: ccielab_at_groupstudy.com
  Sent: Tuesday, June 30, 2009 8:39 PM
  Subject: Re: leased line with G703 module using router 2851 and 2801

Hi Erwin,It's damn easy!controller E1 2/0channel-group 0 unframedafter issuing
above command the router creates a logical serial interface where you can put
your WAN ip, just like you've seen serial port.assign ip here for wan side of
thigns.
interface Serial2/0:0ip address 1.1.1.1 255.255.255.0verify by using 'show
controller e1 1/0 and show inter serial2/0:0"HTH-frog

  On Tue, Jun 30, 2009 at 5:33 PM, erwin wijaya <erwinem.wijaya_at_gmail.com>
wrote:

    dear all,
    how to configure my router when i need to connecting my office (router
2851) with branch office (router 2801) using G703 module. We are using leased
line conection to connecting both office. Also we'll use to send data and
voice..present we using MPLS tech to connecting both office. Is it the same
way?

    thanks alot for any helps.
    regards - erwin

    Blogs and organic groups at http://www.ccie.net

    _______________________________________________________________________
    Subscription information may be found at:
http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Tue Jul 07 2009 - 12:23:36 ART