RE: ospf "show ip ospf route" output doubt

Ivan to the rescue :)

http://blog.ioshints.info/2007/10/display-ospf-spf-tree.html

Regards,

Joe Astorino
CCIE #24347 (R&S)
Sr. Support Engineer - IPexpert, Inc.
URL: http://www.IPexpert.com
 

-----Original Message-----
From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
rakesh m
Sent: Tuesday, June 23, 2009 8:45 AM
To: Cisco certification
Subject: ospf "show ip ospf route" output doubt

i was trying with simple 3 router topology for configuring virtual links .
why does area 0 appear in the following output instead of
area 1 in IA inter area route

topology (ro(172.16.23.0 area 0)--->r1(172.16.123.0 area 1)----->r2

r0#show ip ospf route

            OSPF Router with ID (0.0.0.1) (Process ID 1)

    Area BACKBONE(0)

    Intra-area Route List
* 172.16.26.0/24, Intra, cost 10, area 0, Connected
      via 172.16.26.1, FastEthernet0/0

    Intra-area Router Path List
i 172.16.26.2 [10] via 172.16.26.2, FastEthernet0/0, ABR, Area 0, SPF 5
*
    Inter-area Route List
*> 172.16.123.0/24, Inter, cost 74, area 0
      via 172.16.26.2, FastEthernet0/0*

Thank you

-- 
I have super powers i just dont wanna show you..
http://diaryofccie.blogspot.com
Blogs and organic groups at http://www.ccie.net