Re: MPLS TE clarification

Hi,

Change it to

next-address 10.10.12.2
 next-address 10.10.23.3
 next-address 10.10.3.3

it may work with other configs but it would definitely work with above.

On Thu, May 28, 2009 at 11:31 PM, Splinter <splinter330_at_gmail.com> wrote:
> Hi All,
>
> i have a 3 router topology running mpls traffic eng.
>
> R1---R2---R3
>
> so on R1 I have configured the following.
>
> tunnel13
> ip unnumbered loop0
> tunnel destination 10.10.3.3
> tunnel mode mpls traffic-eng
> tunnel mpls traffic-eng priority 7 7
> tunnel mpls traffic-eng bandwidth 5000
> tunnel mpls traffic-eng path-option 10 explicit name TU13
> tunnel mpls traffic-eng path-selection metric te
>
> ip explicit-path name TU26 enable
> next-address 10.10.12.2
> next-address 10.10.23.2
> next-address 10.10.3.3
>
> Do i need to have the ingress ip address of R3 in the explicit-path
> next-address or is the above acceptable? hop from R2 to R3's loopback0
>
> Splinter
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Sirus Moghadasian
CCIE #21862 (R&S)
Blogs and organic groups at http://www.ccie.net