Re: OSPF Virtual Link

which link is in Area 0?
Thanking You

Yours Sincerely

Divin Mathew John
divinjohn_at_gmail.com
divin_at_dide3d.com
http://www.dide3d.com
+91 9945430983
+91 9846697191
+974 5008916
PGP PUBLIC KEY BLOCK @ http://www.dide3d.com/divin_Public_PGP_key.txt

On Wed, May 27, 2009 at 2:35 AM, Syed Ali <testcricket_at_gmail.com> wrote:

> Hi Ryan,
> Please see below the related info:
>
>
>
> R1#sh ip os vir
> Virtual Link OSPF_VL4 to router 2.2.2.2 is up
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 5, via interface Serial0/1, Cost of using 64
> Transmit Delay is 1 sec, State POINT_TO_POINT,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
> Hello due in 00:00:06
> Adjacency State FULL (Hello suppressed)
> Index 2/3, retransmission queue length 0, number of retransmission 0
> First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
> Last retransmission scan length is 0, maximum is 0
> Last retransmission scan time is 0 msec, maximum is 0 msec
> R1#
> router ospf 1
> router-id 1.1.1.1
> ispf
> log-adjacency-changes
> area 5 virtual-link 2.2.2.2
> network 5.5.12.1 0.0.0.0 area 5
> neighbor 5.5.55.2
> !
>
> ========================================================================================
>
> R2#sh ip os vir
> Virtual Link OSPF_VL0 to router 1.1.1.1 is up
> Run as demand circuit
> DoNotAge LSA allowed.
> Transit area 5, via interface Serial0/0, Cost of using 64
> Transmit Delay is 1 sec, State POINT_TO_POINT,
> Timer intervals configured, Hello 10, Dead 40, Wait 40, Retransmit 5
> Hello due in 00:00:04
> Adjacency State INIT
> Index 0/0, retransmission queue length 0, number of retransmission 0
> First 0x0(0)/0x0(0) Next 0x0(0)/0x0(0)
> Last retransmission scan length is 0, maximum is 0
> Last retransmission scan time is 0 msec, maximum is 0 msec
> R2#
> router ospf 1
> router-id 2.2.2.2
> log-adjacency-changes
> area 5 virtual-link 1.1.1.1
> network 5.5.55.2 0.0.0.0 area 5
> !
>
> thanks
> Syed
>
>
>
>
>
> On Tue, May 26, 2009 at 11:50 PM, Ryan West <rwest_at_zyedge.com> wrote:
>
> > Syed,
> >
> > To better assist, please post 's ip os nei', 's run | s r o', and 's run
> > int lo 0'
> >
> > Thanks,
> >
> > -ryan
> >
> > -----Original Message-----
> > From: nobody_at_groupstudy.com [mailto:nobody_at_groupstudy.com] On Behalf Of
> > Syed Ali
> > Sent: Tuesday, May 26, 2009 4:44 PM
> > To: Cisco certification
> > Subject: OSPF Virtual Link
> >
> > Hi Experts,
> > I have a virtual link between two routers. One side is
> adj
> > is FULL but the other side shows INIT. Each side is configured with the
> > remote side router id as the virtual link peer but no success. Can anyone
> > help?
> >
> > thanks
> > Syed
> >
> >
> > Blogs and organic groups at http://www.ccie.net
> >
> > _______________________________________________________________________
> > Subscription information may be found at:
> > http://www.groupstudy.com/list/CCIELab.html
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html

Blogs and organic groups at http://www.ccie.net
Received on Wed May 27 2009 - 02:44:00 ART