Re: Help w/ 2600 12.3.36 only 64mbram

I don't suppose I know off the top of my head ... but ... it sounds like you
have narrowed this down some.

Any logs? Any debugs to see what flashes across the screen?

HTH,

Andrew Lee Lissitz

On Sat, May 16, 2009 at 6:04 PM, Santiago Enciso
<senciso_at_infocenter.com.py>wrote:

> Hello, I have a task when ever i configure e0/1 under eigrp the router
> crashes.
> The flash led stays blinking. Dont know that to do!!!!! almost a day lost
> trying to overcome this.!!!!
> Any idea, this have never happened before with EIGRP in this router. dont
> have memory to go to 12.4!!!!!!
> Advice is welcome.
>
>
>
> c2600-ik9o3s3-mz.123-26.bin
> IOS (tm) C2600 Software (C2600-IK9O3S3-M), Version 12.3(26), RELEASE
> SOFTWARE (fc2)
>
> cisco 2611 (MPC860) processor (revision 0x203) with 61440K/4096K bytes of
> memory.
> Processor board ID JAD050526YT (1173690101) M860 processor: part number 0,
> mask 49 Bridging software.
> X.25 software, Version 3.0.0.
> 2 Ethernet/IEEE 802.3 interface(s)
> 2 Serial network interface(s)
> 32K bytes of non-volatile configuration memory.
> 16384K bytes of processor board System flash (Read/Write)
>
> Thanks
>
>
>
>
>
> Santiago E
>
>
> Blogs and organic groups at http://www.ccie.net
>
> _______________________________________________________________________
> Subscription information may be found at:
> http://www.groupstudy.com/list/CCIELab.html
>
>
>
>
>
>
>
>

-- 
Andrew Lee Lissitz
all.from.nj_at_gmail.com
Blogs and organic groups at http://www.ccie.net